Kuwsea Reef

[win98ena]

My Name Is ( Abdullah ) From ( Kuwait )

I've been on the Saltwater Many years ..

I Started Build My Tank & Rebuild my house .. :hammer:

( The New Project )

Display: 320 cm x 100 cm x 80 cm

Sump : 4 Tanks = 2 For Flirtation And 2 For Frag Tank And Water Change

Stand: Aluminum

Filtration: BioPellet And Carbon

Lighting: 4 x 250w Giesemann HQI And 6 x Radion LED G2

Circulation : 4 x VorTech MP40 And 2 x Battery Backup

Return Pump: AquaEL DC Pump 25000 l/h

Skimmer: AquaC EV-1000

Calcium Reactor : Korallin C-3002 "” Rated for up to 800g

Dosing: Aquahuse 6 units


Some Pic's Of My Old Tanks

250L


RedSea Tank 250


1100L

 

[win98ena]

ooo

ooo

Start Crash And Rebuilding
ooo

ooo


New Electricity
ooo


ooo

ooo

ooo

ooo


Water feeding
ooo

 

[win98ena]

 

[win98ena]

Mooring Works





Clear & Cold



The Stand is ready to collect ..









Base WaterProof Wood



Soft Roper The Pest For Protect The Bottom Glass

 

[win98ena]

19mm Glass Ready to deliver From The Factory ..
19mm For Tank
12mm For Sump

 

[svanur]

This is interesting build.is the stand aluminum?

 

[win98ena]

This is interesting build.is the stand aluminum?

Thanks alot "¦ Yes Aluminium "¦ Yes it is not affected by water and i don't need to paint

 

[win98ena]

Ecotech Marine Package

ooo



Return Pump

 

[Daniel62]

Looking good so far, however I am not so sure that I would use that thick of foam for under the tank. If is does not compress fairly evenly I think it might stress crack you tank.

Someone please correct me if I am wrong.

Good luck with you build

 

[win98ena]

Looking good so far, however I am not so sure that I would use that thick of foam for under the tank. If is does not compress fairly evenly I think it might stress crack you tank.

Someone please correct me if I am wrong.

Good luck with you build

Thank you "¦ I am sure about the foam i used before for my old tank 1100L

My friend he have a fish store he always using that foam for his tanks and his customers ..

and used For sound insulation ..

 

[win98ena]

Aluminium stand is ready ..




first sheet of 19mm glass for the base to Heavy .. carefully



Yeah



goes the silicone ..



back panel it is the first .. placed on the wooden to heavy



placed on the silicone with some compressing ..



The said silicone goes



more silicone and this is just to stuck the glass and there are tow layers of silicone



The side panel Fixed into place .. Adhesive tape to hold the glass

 

[win98ena]

Left side panel ..



Placed the side panels "¦ carefully ..



Nice smile go don't stop ..





More silicone for front panel ..



Ready for bring 19mm panel ..



The front panel was taken to the right place ..



Done ..



The excess silicone was removed "¦ Nice and clean .



cleaned of excess silicone ..

 

[win98ena]

Filtration And Frags ... Tanks


ooo

ooo

Return sump "¦ I will changing water from here


ooo

ooo

Begin working on supports up and down

ooo

Collected Lights stand .. big bridge of aluminium

ooo

Finishing silicone "¦ all that Adhesive tape to get unique looking

ooo

ooo

 

[win98ena]

ooo

The partition almost done ..

ooo

Decoration ..

ooo

ooo

 

[AntiSatan]

Very nice alot of work

 

[Dapg8gt]

Nice build, thanks for sharing your old tanks looked like you know what your doing =)..

 

[win98ena]

Very nice alot of work

Thank you .. yes there is lot of works .. but almost done

 

[win98ena]

Nice build, thanks for sharing your old tanks looked like you know what your doing =)..

Thanks .. i put all my experience and plans to doing this project

 

[Sps Dream]

Well done, subscribed.

 

[win98ena]

Well done, subscribed.

Thank you a lot ...