Linking 2 new 6055's
- Thread starter jah hoeva
- Start date
Turbelle® controller in the inverse operation (3)
If a second Turbelle® pump (or Wavebox) is
positioned on the opposite side of the aquarium,
the inverse operation must be activated on the
controller. To do this, press the „food timer“ button
for more than 5 seconds. Visually, the function will
be indicated through a blinking of the „select“ LED.
To switch back to the parallel operation (factory
default setting), the „food timer“ button must be
pressed again for more than 5 seconds, which will
cause the LED to be lit constantly. Note: The inverse
function cannot be switched to the “external control“
function or during the „auto adjust“ operation.
from a 6095 manual, hope this helps !!
If a second Turbelle® pump (or Wavebox) is
positioned on the opposite side of the aquarium,
the inverse operation must be activated on the
controller. To do this, press the „food timer“ button
for more than 5 seconds. Visually, the function will
be indicated through a blinking of the „select“ LED.
To switch back to the parallel operation (factory
default setting), the „food timer“ button must be
pressed again for more than 5 seconds, which will
cause the LED to be lit constantly. Note: The inverse
function cannot be switched to the “external control“
function or during the „auto adjust“ operation.
from a 6095 manual, hope this helps !!
