moonlight program
- Thread starter jemw
- Start date
Alex Y EcoTech
RC Sponsor
Jim,
I'm not sure exactly what you're asking? You have the ability to create a totally custom moonlight setting or have your lights mimic the actual lunar cycle. You can reference the following video link for more information, but calling in to customer service would be your best option. http://ecotechmarine.com/media-gall...t-moonlight-on-all-night-or-part-of-the-night
I'm not sure exactly what you're asking? You have the ability to create a totally custom moonlight setting or have your lights mimic the actual lunar cycle. You can reference the following video link for more information, but calling in to customer service would be your best option. http://ecotechmarine.com/media-gall...t-moonlight-on-all-night-or-part-of-the-night
jemw
New member
The video does not show "have your lights mimic the actual lunar cycle" and I haven't found that information.
Alex Y EcoTech
RC Sponsor
Jim,
Simply selecting the "Lunar Phases" option to "On". Will allow your lights to follow the lunar schedule. You can find this under "Settings" on the left side of your screen. Please give us a call if you have any other questions.
Simply selecting the "Lunar Phases" option to "On". Will allow your lights to follow the lunar schedule. You can find this under "Settings" on the left side of your screen. Please give us a call if you have any other questions.
jemw
New member
Alex - I've done that since day 1. Not once have there been any moonlights. I even get up in the middle of the night on full moon nights to see. And nada
Alex Y EcoTech
RC Sponsor
Jim,
Have you contacted our Customer Service department for additional troubleshooting?
Have you contacted our Customer Service department for additional troubleshooting?
jemw
New member
I sent an email to the customer support address in your signature yesterday with attn: Alex Y
Griffter18
New member
Alex not sure if you ever got this sorted but I'm a new owner of radion lights and ran into problems setting up the moonlights.
What worked for me was to increase the orange intensity slider upwards and then followed the advice on the video.
Initially it didn't work, but then I realised that if I had to increased the intensity up to 20% (which is the max) and also set the blue channel upto 100% with all other channels being 0% at both the start and end of the cycle it worked.
It wasn't working previously because the individual settings at each of the point wasn't the same and also because I only had it set at 5% which was too low to register at the point in the moon cycle I was at when setting them up.
What worked for me was to increase the orange intensity slider upwards and then followed the advice on the video.
Initially it didn't work, but then I realised that if I had to increased the intensity up to 20% (which is the max) and also set the blue channel upto 100% with all other channels being 0% at both the start and end of the cycle it worked.
It wasn't working previously because the individual settings at each of the point wasn't the same and also because I only had it set at 5% which was too low to register at the point in the moon cycle I was at when setting them up.
