Mr and Mrs Reef - 290g in wall build

[MrsReefK]

See the eggs? Haven't seen any nudibranchs yet, but am definitely finding eggs. Dipped the main colony I found them of tonight. Will dip the remaining tomorrow, and start dipping every 3 or say days.

For now, I'm headed down with a flashlight to see if I can locate the culprit.

 

[MrsReefK]

After researching further I'm not sure those are nudibranch eggs. These were in clusters rather than spread out in lines. See the snail she'll in the middle of all of them? Never have seen that snail before, and it's under all of the eggs. Found eggs on another frag plug underside on the opposite side of the tank.

 

[MrsReefK]

Mr and Mrs Reef - 290g in wall build

The 290 is officially cycling. Seeded all of the rock with a piece from our established tank last night. Let the cycling begin.

Having trouble getting two of our radions to connect via the reef link, more to come on that tonight. Will get pictures tonight of everything and the progress.

 

[iced98lx]

Good progress!!

 

[MrsReefK]

Good progress!!

We're finally back on track of making awesome progress. Sump room is turning out amazing. Still some final touches to be completed.

Remember those eggs I found? Wel, they seem to be snail eggs and are really ticking off my Zoas. Posted a thread in the zoa section for more insight to help ID.

Tomorrow for the tank: have two radions that aren't connecting to the reef link, conquering those!

Awhile back we bought the tunze glass cleaner. I have to admit I'm not a big fan. The non floating is not easy to work with, we were right at the max thickness for it, so wondering if it usually doesn't fall off for other folks due to thinner walls.

Ordering a "tiger" algae scrubber to see if it operates better.

 

[MrsReefK]

Pictures!!

 

[MrsReefK]

Mr and Mrs Reef - 290g in wall build

And more pictures! Still have to clean up the wiring and get a few more things mounted. Need to put the other 40g breeder on top for ATO reservoir. Need to get a light for the fuge, and get the AWC up and going.

 

[IvanTheTerrible]

Looks awesome. You guys should be proud.

-Ivan

 

[MrsReefK]

Looks awesome. You guys should be proud.



-Ivan

Thanks Ivan!! We are very proud. When people come over we're ready to show it off every time. Comical how excited we get.

Jeremy's (husband) done an amazing job designing the room and putting the plans into actual production.

 

[dave.m]

I would be very much surprised if you should ever need a 40 gallon reservoir for your automated top-off. More likely it will be under ~10 gallons per day.

Your reservoir shouldn't be larger than your daily top-off requirement so that, should something cause your ATO stay stuck in the ON position, it will never be able to flood the system with too much fresh water.

Dave.M

 

[MrReefK]

I would be very much surprised if you should ever need a 40 gallon reservoir for your automated top-off. More likely it will be under ~10 gallons per day.

Your reservoir shouldn't be larger than your daily top-off requirement so that, should something cause your ATO stay stuck in the ON position, it will never be able to flood the system with too much fresh water.

Dave.M

There will be many fail safes.

40 gallon fresh is only going to fill on Saturdays so Sunday's I can fill the lower 40 mix tank and add salt for continuous water changes for the week (5 gallons per day). Then Monday it will fill again to be used for ATO during the week. It will be programmed with the apex using float switches and solenoid connected to the RO. It will also have a back up mechanical float switch.

Then on top of all that The continuous water change and all ATO will be done with 2 different Neptune DOS pumps into the sump through mechanical floats! Can't think of any safer way!!! [emoji41]

Apex also has salinity monitoring and will alarm us if anything goes out of programmed tolerance.

 

[dave.m]

I hope that will work for you. Float switches are notorious for failing. Salinity probes are chancy and need constant recalibrating. A small ATO reservoir is just an extra step for security.

Dave.M

 

[MrReefK]

I hope that will work for you. Float switches are notorious for failing. Salinity probes are chancy and need constant recalibrating. A small ATO reservoir is just an extra step for security.

Dave.M

Well other then having a float switch, to control the solenoid, which will be run off an Apex with a time default and a mechanical float if those 3 things fail there's still a floor drain! I'm confident in having a larger ATO freshwater tank. Even if I had a smaller ATO tank I would constantly have to fill it from a water source of some kind.

 

[MrsReefK]

We are cycled and ready for CUC! We buffed the outside of the tank. It didn't turn out as planned, we will be redoing it this weekend. We did the Novus steps backwards, lol. So it's a bit cloudy now. Don't ask how we managed that one!

I need to pull some sand out of the DT. It's deeper than I want. It creates such a dust storm, I keep putting it off. Doing that this weekend as well.

Fish will be in soon. They'll be so happy to be out of the QT.


Sent from my iPhone using Tapatalk

 

[MrsReefK]

The Zoas have diminished that were being bothered by the snails/eggs. Only a few polyps left, that was a decent mini colony.


Sent from my iPhone using Tapatalk

 

[MrsReefK]

Mr and Mrs Reef - 290g in wall build

Kessil grow light for the fuge! So excited. BRS shipment arrived today. It's like Christmas when these packages come!

Sent from my iPhone using Tapatalk

 

[MrsReefK]

We put in the In line TDS meter that checks the TDS in 3 different stages. Our starting TDS is 680!! Looks like we are getting two more stages for the RO unit plus a water saver.


Sent from my iPhone using Tapatalk

 

[Learn It]

Looks like the cat is really helping with the progress there haha I recently had nudibrachs and the eggs were found in a spiral along the underside of the zoa. Best viewed @ night under a flashlight.

 

[MrsReefK]

Mr and Mrs Reef - 290g in wall build

Fish will finally be hitting the DT this weekend. We had a bit of a set back, originally put in too much sand for my taste. We didn't rinse the sand because it was live sand, we thought that was best (against everyone's suggestion to rinse it) and we are paying the price, still. I believe I finally have the sand to how much I want in there, so no more dust storms!

To remove the sand we made a siphon with some 1" hose and slowly but surely removed a bunch.

Even with the filter socks, it would take 2-3 days to clear up. Nervous for what something like a sand sifting goby is going to do with dust storms. We shall see! It's got to lighten up over time, I hope.

Kessil grow light is on the fuge. Should I run this opposite of day lights to help balance PH swings?

Kalk stirrer is in, waiting to go live. We currently are only running the skimmer.

Next we will get GFO reactor ready, carbon, calc reactor and Kalk stirrer. All of that will come with time, were in no rush to hook it up until the system needs. We have all reactors and stirrers, so we're ready to put them in whenever the milestones call for it.

Speaking of milestones, when would you kick on GFO and carbon? What signs or do you run them form the beginning?

We don't plan on putting the calc reactor or Kalk stirrer inline until corals begin consuming calc, that one is more obvious to me.


Sent from my iPhone using Tapatalk

 

[dave.m]

Your continual weekly water testing should tell you when you need to add your filters. Yes, I would start your refugium on a reverse photo-period from the start.

Dave.M