Nano Wavebox & Stream 2 6105 THEY'RE HERE!!!!!!!!!!!
- Thread starter Stevenx2
- Start date
ClownReef®
Bubbletrousing
Uh..I just took some Dramamine 
Ok, ill gladly eat my words.. Steve here is the best wave box teacher ever..lol
..sorry for the whining..LOL
And here is the wave after Steve's help
Ok, ill gladly eat my words.. Steve here is the best wave box teacher ever..lol
..sorry for the whining..LOL
And here is the wave after Steve's help
BangkokMatt
New member
@Stevenx2
Has the noise settled down on the 6105 yet.
I have a 6205 on pre order ans so I can only assume that it will potentially be even noisier.
Has the noise settled down on the 6105 yet.
I have a 6205 on pre order ans so I can only assume that it will potentially be even noisier.
docwells
Member
Steve,
How about a little help with my nanowavebox? I put it in today and could not get it right. I will be patient, but can you give me some pointers?
Also has anyone put their nanowavebox on a profilux controller? I would like to do this, but if I get it tuned in on the tunze controller, not sure how that would translate to the profilux.
How about a little help with my nanowavebox? I put it in today and could not get it right. I will be patient, but can you give me some pointers?
Also has anyone put their nanowavebox on a profilux controller? I would like to do this, but if I get it tuned in on the tunze controller, not sure how that would translate to the profilux.
Wellington, i wouldn't use the tunze wavebox on the profilux. I am more than happy to help you. Here is the instruction
1. Make sure the wavebox has a straight path
2. Make sure your return nozzle not pointing at it or the same direction next to the wavebox direction Ahem... Diego
Dialing
Turn the white knob on your controller counter Clockwise (CW) till stop.
Slowly (i mean super slow) adjust the white knob on your controller CW. Take 1 min to observe between adjustment.
Keep on turning the knob and observe till you get the right wave pattern.
If you want to find your max, keep on turning the knob a little bit at the time and observe 2 things will happen
1. the wave will get bigger
2. The wave disappear
If the wave get bigger, keep turn the knob till the wave disappear. One the wave disappear, just turn the knob counter CW to where you were. You should get the wave back and that is your max. If you need any more help, you are more than welcome to drop me a call....
1. Make sure the wavebox has a straight path
2. Make sure your return nozzle not pointing at it or the same direction next to the wavebox direction Ahem... Diego
Dialing
Turn the white knob on your controller counter Clockwise (CW) till stop.
Slowly (i mean super slow) adjust the white knob on your controller CW. Take 1 min to observe between adjustment.
Keep on turning the knob and observe till you get the right wave pattern.
If you want to find your max, keep on turning the knob a little bit at the time and observe 2 things will happen
1. the wave will get bigger
2. The wave disappear
If the wave get bigger, keep turn the knob till the wave disappear. One the wave disappear, just turn the knob counter CW to where you were. You should get the wave back and that is your max
. If you need any more help, you are more than welcome to drop me a call....
ClownReef®
Bubbletrousing
Those are the directions Tunze should write on the instructions..or Steve should do tours around the U.S on how to set up the box ..
..
13threefmaniac
New member
Steve = Flow Guru!! ( He must have been a wave in his past life )
<a href=showthread.php?s=&postid=13524172#post13524172 target=_blank>Originally posted</a> by ClownReef®
Those are the directions Tunze should write on the instructions..or Steve should do tours around the U.S on how to set up the box
On tunze instruction they should put a remark box "DO NOT FEAR OF THE WHITE KNOB, TURN IT SLOWLY TILL YOU ACHIEVED YOUR GOAL"
. No tour for me bud... I hate travel. 
Slick Fork
New member
Why not?
13threefmaniac
New member
<a href=showthread.php?s=&postid=13524981#post13524981 target=_blank>Originally posted</a> by Jar*Head
I have the word tunze tat on my ahem behind does that mean anything
:eek1: Actually, i wouldn't be surprised if you did have it tattooed somewhere on you. Do you sleep in a XL Tunze Wavebox??
j/k. I better not get this thread off track. Long live Tunze!!
p.s: Do Tunze send you a few freebies at least for all the work you do on their behalf? Or maybe you could get them to name their next wave making device/pump after you. Stream Steve anyone?
13threefmaniac
New member
Oh man.... from now on, everytime i see a wave coming towards me i'm going to picture it with a face saying "I am JARHEAD"!!! But seriously, the help you provide to those who need it is invaluable and a real help to newbies like myself. Nice to see that there are still some people(a fair few on RC i must say) who take pleasure in helping others.
Similar threads
