New product from ghl

[AQD_ottawa]

We are pleased to introduce to you the GHL PowerHub-6D-PAB

The new switch module Powerhub-6D-PAB

The digital switch module Powerhub-6D-PAB for ProfiLux 3 (eX) is addressed to professional users and mainly designed to be used in electric control cabinets.

6 channels can be switched separately, they are controlled over the ProfiLux Aquatic Bus (PAB) of the ProfiLux 3 (eX).

Technical data:
"¢supply voltage 90 - 240 V (50 Hz / 60 Hz) As well as standard 110V devices you can Also run 220V devices in North America (not on the same strip of course).
"¢6 electrically isolated relays
"¢digital bus system (PAB), also multiple powerhubs can be controlled independently
"¢mounting over DIN-rail
"¢nominal current 10 A each channel (up to 160 A inrush current) at max. 240 V
"¢LEDs indicate the switching state, communication and operational conditions

Please contact your retailer in the next 10 day for pricing and availability.

 

[bad inferno]

Hi

I want to use 12VDC pumps and do not want to use lots of plug packs in my powerbar thus wanting some relay contacts controleld through the profilux.

1. Are the outputs fully isolated from one another ? i.e. terminals are simply relay contacts

2. Could I use this to switch 12 or 24VDC loads through the relay contacts ?

3. Confused if this will work with a profilux 3.1N or do I really need the ex version, as I do not understand why it would be limited. Or do I ahve to buy to ex upgrade board ?

 

[AQD_ottawa]

the power hub is a power bar in all name but not having sockets it has terminals that wil control any 120v or 220v device you attach to it

so just imagine a power bar but without sockets instead terminals

 

[bad inferno]

Oh, I understand. I was really after some dry contact outputs so I can switch some low voltage DC devices.

never mind, thanks for your response. I did not really want to buy a lot of 12VDC plug packs to plug into a PAB powerbar. Looks like thats the way I'll ahve to go