Organizing the cables in the sump

No real tips, just keep it kind of segregated and clean. Maybe every 6 months or so unplug everything and wipe the cords down with a damp cloth. Maybe use some masking tape and make kind of a tag around each one and label it. (heater, skimmer etc) Keep everything dry. ;)

If your just talking a sump in general, (that other tank down below) sometimes simplicity is best. Don't clutter it up. GL.
 
You can take any kind of hose and with a good pair of shears, cut right up the side of a certain length of hose. Slip cords and smaller hose inside to organize the bundle. YOu can also easily pull one out for replacement.
 
Do you know where I can find online some kind of suction caps for lineing the cables? I.E wave pump's cable.. lights etc.
 
f3d329e327b49bd77b0719641f324ef7.jpg


Try these it works wonders

6f8cbb579ebb16657f49b0641b8687c5.jpg
 
I like this cord wrap stuff
$_35.JPG

I got a bunch cheap and I use it on the cords inside my tank too so that my urchin can't nibble through and expose the wires.
 
Back
Top