Profilux Light II and LED's

[GEORGEDOPE]

I am going to build an LED light and am looking for the simplest any to controll them. The light will have 12 Meanwell ELN-60-48-D controllers.
I want to wire 6 together for white and 6 together for blue. Both controllable separately.There will also be a single Meanwell to conroll 8 moon lights.
This means that 3 plugs would plug into the Profilux Light II and need 2 0-10V dimming outlets. My question is, will this work? Can each dimming channel handle 6 Meanwells?

 

[AQD_ottawa]

I need to know the current draw of the 1-10V compnent of the meanwell to answer this.

Having said that we have multiple users doing exactly with you require without issues, however you can not independantly control 6 meanwells on one L port, an L port splits into 2 giving you two independant control channels.

 

[GEORGEDOPE]

I heard back from Meanwell and they said the Max current draw for the 0-10V dimming is 40mA. So can 1 channel of the Profilx handle 6 Meanwells wired together?

 

[AQD_ottawa]

The profiLux can handle a current load of 10ma

This means that you have to make sure that the LEDS attached to the driver and onto this port does not exceed 10ma

As an example the current draw of a T5 ballast is 0.6mA!