PVC Pipe Support- Looking for

[BeanMachine]

Ive got a 1.5 inch line coming up through my stand. Is there some sort of support piece that I could pass the pipe through and screw a flange down to the plywood?

I was going to build a L shaped piece of wood, and attach the pvc clips but is there a cleaner way?

Next question, anyone know a good site to order plastic or fiberglass strut? Ive seen some online and thinking I may try that.

 

[BeanMachine]

 

[SanClementeEric]

Have pics or a drawing? I'm having a hard time picturing how/why you need support.

 

[SanClementeEric]

Lol!

 

[joesig]

You could try a plastic suspension clamp get 2" and 1-1/2" because some are made for copper size not pipe size


Sent from my iPhone using Tapatalk

 

[SanClementeEric]

Is this pressurized or is it an overflow? Also, how is connected at the top? (above the union.)

 

[BeanMachine]

Or what about a pvc flange.... a vertical pipe with some ts and get those snap ts... say three going up to the tank.

 

[BeanMachine]

Yes pressure side... its a 1.5 inch vertical line up to the sea swirls.

 

[joesig]

PVC Pipe Support- Looking for

Also mcmaster carr in santafe springs has everything including fiberglass channel

And i mean they have EVERYTHING that place is huge

https://www.mcmaster.com/#strut-channel-systems/=19ic56q


Sent from my iPhone using Tapatalk

 

[BeanMachine]

With a heavy cepex ball valve.

 

[BeanMachine]

The strut is for under the hood. Not for the return. Just loiking for something I can support the line with and not have to worry about it

 

[BeanMachine]

You could try a plastic suspension clamp get 2" and 1-1/2" because some are made for copper size not pipe size


Sent from my iPhone using Tapatalk

Are those fairly strong?

 

[SanClementeEric]

With a heavy cepex ball valve.

Man, I'd almost want to make a frame for the whole back side to hang that whole deal from.

 

[bblumberg]

One of these Clic-clamps looks like it would fit above the ball valve. They hold tight and are relatively easy to remove if needed.

http://www.parts.spearsmfg.com/images/parts/Clic-hanger.png

 

[BeanMachine]

Man, I'd almost want to make a frame for the whole back side to hang that whole deal from.

Something like my drawing?

 

[theman772]

Go look at electrical conduit mounting there's a track type railing
With clamps for 1 1/2 conduit you want the outdoor fiberglass kind
Home Depot has the metal kind if you want to go look at the stuff first
Super clean install