Recommendation needed for 55 RR

[RacerX308e]

I need a recommendation for a 55 acrylic RR that I want to use for SPS/Clam primarily. Would like to use Southdown for substrate as I look the look and consistency but I want a lot of random flow. In the past, I have used MJ's and just don't like the linear flow. Also, the 55 gal will probably give way to a 75 or a 90 in two years when my office lease is up. Not a big tank b/c it is in my office.

I am thinking of a 7095 with two 6055's. Would this work and work well? Can the controller tone down the flow in the 55 but be ready for the larger tank. Also, there is always the possiblity that in my office move, the new office won't like a tank or the configuration may not allow. In that case, I will combine my two tanks (one office/one home) into one big in wall in the basement and would want the Tunze units to work there as well. This is one reason I like the multicontroller which I believe could be used with a wavebox in the bigger tank.

Thanks in advance for the help.

Edd

 

[rvitko]

Waveboxes come with there own controller.

I think two 6055 and a 7095 would be perfect, a 6055 is capable of a flow rate as low as 200 gph.

 

[shawnz28]

I ran a pair of 6055s and a 7095 using them alternating from about 40% to 100% and for me was about perfect.