RK2 configurement for Large tanks

[reefdna]

I just purchased a reefkeeper2 and am in the final stages of putting a 200 gal together. I am trying to configure the RK2 for everything I have. Here's what I have please give me your advice.

RK2--temp probe--15A extension socket--

need tp plug in:
3, 400W MH's (amps?)
1 Sequence 3200 for CL (2amps)
1 Iwaki 30rlt return pump (1 amp)
Tunze 6080 stream (.5amp)
Tradewinds 1/3HP chiller (amps?)
Mag 9 for refugium return pump (.5amp)
a couple of maxijets in the refugium and sump for water movement

Any thoughts? Thanks for the help.

Ed C

 

[elmexotics]

are you metal halides on individual ballast? And do you want to turn them on all at once or individually? I had to buy the expansion sockets for my halides so I would not blow the fuse on the RK 2

http://www.digitalaquatics.com/expansion.html

 

[reefdna]

Each MH has it's own PFO soft start ballast. I also bought the ezpansion socket and that's part of my question.... can I put all 3 MH's on the expansion socket? How is your's configured? What do you have in which socket? Thanks again

Ed C

 

[elmexotics]

I have a dedicated 20 amp circuit for my halides and they are all running off of the expansion socket. Never had a problem with it.

 

[reefdna]

So your expansion socket is plugged into the wall or the RK? Would you mind poating what you have running into which socket to give me a better idea of how yours is set-up?

BTW, WELCOME to RC!

Ed C