Set up apex to dose for seconds, not minutes

[Reefers4U]

I don't have heavy alk demand right now and even one minute a day is increasing the alk and calc levels.

Woke up to a pH alarm this morning.

I searched google but must not be using the correct search terms.

Anyone know how to set it to dose seconds each day or perhaps one minute every other day?

 

[scrapz]

Fallback OFF
OSC 000:00/000:35/059:25 Then ON
If SPSPH > 8.35 Then OFF
If Output KALKMIX-2-8 = ON Then OFF
When On > 001:30 Then OFF

Line 1. If power fails it turns off
Line 2. Time delay on when triggered, how long it’s on. How long it’s off before turning on again. Must be coded for 24 hour periods or it will not work correctly.
Line 3. If ph is above this value, it turns off the outlet.
Line 4. If outlet xx is on then current outlet stays off.
Line 5. If outlet on over xx amount of time, it turns off

 

[Reefers4U]

Fallback OFF
OSC 000:00/000:35/059:25 Then ON

This looks like the line I need. But I dont understand the 000:00 part.

where 000:00 is time delay when triggered - not sure what this means? Is this the hour it turns on?

where 000:35 is how many seconds it will dose, so here it doses for 35 seconds

where 059:25 is the time period between it shutting off and it turning on again.So here it turns on every hour.

 

[scrapz]

This looks like the line I need. But I dont understand the 000:00 part.

where 000:00 is time delay when triggered - not sure what this means? Is this the hour it turns on?

where 000:35 is how many seconds it will dose, so here it doses for 35 seconds

where 059:25 is the time period between it shutting off and it turning on again.So here it turns on every hour.

First number is delay of trigger on once the last number run. (55 mins)
Second number is length of time on.
Third number is length of time off.

1-2-3-1