Stuff for sale - Getting out of the hobby

Thanks for all the well wishes, folks! It was a hard decision to start this thread :(

Rhett -- Yep, skimmer is in great shape. I just did a monster clean of it not too long ago and will clean it up again before letting it go. It is about 2 or 3 years old maybe?

Jack
 
Yep. 48" wide, 18" deep, and I think 24" tall. The canopy is obscuring the true top/bottom to the tank, so I think it is 24". The stand is 50 1/2" wide, 19 1/2" deep and 32" tall. Stand + canopy is about 61" tall.
 
Tank

Tank

Thanks for all the well wishes, folks! It was a hard decision to start this thread :(

Rhett -- Yep, skimmer is in great shape. I just did a monster clean of it not too long ago and will clean it up again before letting it go. It is about 2 or 3 years old maybe?

Jack

Well always sorry to see anyone get out of the hobby, But your tank looks pretty good for being Ignored. If the Item I asked about Is avaiable I think Zach will P/U for me. Thanks and good luck with your future endeavers.
Bill:thumbsup:
 
Jack -

I'll be able to pick up any time this week after 5:30 as I work in the Brentwood area during the day.

Well always sorry to see anyone get out of the hobby, But your tank looks pretty good for being Ignored. If the Item I asked about Is avaiable I think Zach will P/U for me. Thanks and good luck with your future endeavers.
Bill:thumbsup:

Sure can, no problem :)
 
Sorry to hear your leaving the hobby! I miss some good deals there! IF he backs out on that Aquacontroller Jr. I want it! I'm starting to stock up on my new project for a new tank sometime soon I hope....Good Luck Jack!
 
All -- I've got several PMs to go through (I've read through them, but haven't replied yet) and will try to get replies out today. KafudaFish -- yep, that is still available.

A bit of clarification on the Tunze 6100/6000. I have 2 pumps + the 7095 controller. All in great shape. I have the 6100 transformers (2 of them) as well as the 6000 transformers (2 of them) and you can make either pump into a 6100 or 6000 depending on which transformer you use. So you are really getting 2x6100s with a 7095 controller, Magnet mounts, AND 2x6000 transformers.

Here is the list so far:

Spoken For
Tunze 6025 Nano Stream (2 pumps), $70.00 (One pump has a damaged clamp. A new clamp can be purchased for $7.94) AdrianBryce
Tunze 9010 Skimmer with extra cup, $150 commonstranger
Aquacontroller Jr. + DC-8 + DC-4HD + pH + Temp, $150 Rocket88
Kalk reactor, $20 andywe, Nashvegas
Eheim 1260 635gph pump, New in box, $100 KafudaFish
90 Gallon Reef Ready Aquarium + Stand + Sump + misc plumbing, $200 Rocket88, cablebox2003
Masterflex 2rpm pump with 2 pump heads, $50 sandalscout, zef004
Masterflex variable rpm pump with 1 pump head, $60 sandalscout, zef004
Refractometer + 1.009 calibration fluid, $20 poolkeeper1
Fragging Shears (Stainless Steel), $10 Nashvegas
Maxijet 1200, $5 andywe, Nashvegas
Maxijet 600, $5 andywe, Nashvegas
Maxijet 400, $5 andywe, Nashvegas
Visitherm Stealth Heater - 75W, $5 AdrianBryce
Visitherm Stealth Heater - 200W, $10 ZachB
Visitherm Stealth Heater - 200W, $10 ZachB
Coral / Fish bags (~ 300 bags), $10 andywe
6x54W T5 retrofit with icecap reflectors + bulbs (old bulbs), $100 sandalscout
Seachem Reef Dip - 500ml (new), $5 andywe, Nashvegas
Seachem Reef Plus - 500ml (new), $5 Nashvegas
TLF Revive coral cleaner - 500ml (I may have opened this, but it is full), $5 lotsoftats
Misc Tests (Salifert Alk, Salifert PO4, Salifert Nitrate, Seachem Ca, Seachem Mg), $5 for the lot lotsoftats, eyebedam
6-line Wrasse, $15 tkimmons85, zef004
Various grade A acans, $20 each andywe, lotsoftats, luckyfish, zef004, Nashvegas, gflat65
Ricordea (blue, green, orange, yellow), $7 each eyebedam, AdrianBryce, luckyfish, Nashvegas
Dead rock (some very nice pieces), $1.50 /lb zef004

Not yet spoken for:
Tunze 6100 x 2 + 7095 Controller + magnet mounts + 2x6000 transformers, $500
Tunze Osmolator + extra pump, $100
Topoff Container + float valve, $10
CPR Aquafuge, $50
Pentair Rainbow Lifeguard Mechanical Filter AF-94 + extra filters + pressure gauge, $40
Pentair Rainbow Lifeguard Chemical Filter AF-93-19, $25
Ocean Runner 3500 gph pump, $40
Eheim 1250 317gph pump, $50
Masterflex tubing, $20
Marineland Eclipse 12 gallon Aquarium with light and filter, $40
Marineland Timer, $2
Red Sea Max 34 gallon Aquarium setup with Stand, $300
Misbar oscillaris clown, $15
Live rock, $2 /lb -- Absolutely no aiptaisias - but there is bubble algae :(
 
I would be interested in:
Marineland Timer $2
Ricordea $7- I know I am in line behind a lot of others but will still be interested in any that are left
Visitherm Stealth Heater 75W $5

PM me with info on if they are still available and when pick up is possible. I work in Nashville.
 
Jack, I'll take the tubing for the masterflex pumps as well. I assume this is to replace the tubing tract that wears out in the roller assemblies?

What type of container is the topoff container? dimensions?

Thanks
 
Yep. It is norprene tubing, I think. Super durable.

I'll have to measure the dimensions. I think it holds about 8-10 gallons. It is a plastic "wine fermentation" container -- a wide-tall bucket with a hole drilled in the side at the top for the float valve, and another hole for the topoff pump wiring/tubing. I'll see if I can get dimensions when I get home. You can see a partial pic of it in the last picture showing the stand (on page one of this thread). It is the bucket that has grapes on it.

Jack
 
Jack...will you be at the swap?...How far from the swap location are you?

the reason I ask is I will not be down there till the swap....and I don't want to hold up your sale waiting on me to get there on the 23rd.....can you post some pics of the acans?..andywe is in front of me but I hope he passes...LOL
 
Jack, what is the size of the Topoff Container + float valve, $10?
Thanks,
Tim

I'll have to measure the dimensions. I think it holds about 8-10 gallons. It is a plastic "wine fermentation" container -- a wide-tall bucket with a hole drilled in the side at the top for the float valve, and another hole for the topoff pump wiring/tubing. I'll see if I can get dimensions when I get home. You can see a partial pic of it in the last picture showing the stand (on page one of this thread). It is the bucket that has grapes on it.

Jack
 
Back
Top