The T5 Q&a Thread

Status
Not open for further replies.
lougotzz said:
Grim, what would be the best placement of the following bulbs in a six bulb 48'' ati unit for SPS dominated tank?

Five ati blue plus, one UVL actinic white, one GE 6500k, One UVL 75/25.

Switching from an 8 bulb unit to a six bulb unit.

Thanks.
Click to expand...

Front
ATI Blue Plus
Blue Plus
Fiji Purple
GE daylight
Blue Plus
Blue Plus
 
Does anyone know the weight of the ATI power module 8x80 fixture?

Does it have 2 or 3 cords to control the lights?

Does it come with a hanging kit or should I go get one myself?

In my 180 how high should I have it off the top of the tank and how low in the tank can I keep SPS / clams?

I should be getting mine in soon and just want to be ready when it arrives.

Thanks
 
Thanks, my fixture while bought from a local dealer / friend is actually coming from RG.

I've just seen differing info about the fixture concerning cords, amperage draw, etc and was wondering if anyone that had one could give me the skinny. Especially any tips on mounting it...
 
Hey Grim you definitely seem to know your stuff!

I got a 48" 6 bulb tek for Christmas and I plan on putting it on a 90 gallon 'peninsula' style tank. What kind of bulb layout would you use?

Thanks.
 
mlb75 said:
Does anyone know the weight of the ATI power module 8x80 fixture?

Does it have 2 or 3 cords to control the lights?

Does it come with a hanging kit or should I go get one myself?

In my 180 how high should I have it off the top of the tank and how low in the tank can I keep SPS / clams?

I should be getting mine in soon and just want to be ready when it arrives.

Thanks
Click to expand...

You can probably call reefgeek and get the weight and other specifics.

There is some info floating around on Reefgeeks forum here.

I would say you would want to keep the fixture within about 4 inches of the tank and the SPS up off the sand at least a little.
 
Grim

I have a 40 breeder with canopy and I want SPS reef with a few zoas on the sand.

Recommendations on Halides and/or T5s retros for SPS growth? I will be running fans and no chiller.

Thanks.
 
OldNemo said:
Grim

I have a 40 breeder with canopy and I want SPS reef with a few zoas on the sand.

Recommendations on Halides and/or T5s retros for SPS growth? I will be running fans and no chiller.

Thanks.
Click to expand...

Standard driven 6 lamp retrofit kit would be plenty. Running a halide may or may not require a chiller depending on the room temp and how high about the water you can place the light.
 
The Grim Reefer said:
Standard driven 6 lamp retrofit kit would be plenty. Running a halide may or may not require a chiller depending on the room temp and how high about the water you can place the light.
Click to expand...

Any recommendations on a good 6 lamp retro kit?

The tank will be in my basement so it is cool and it will be about 5 in. above the water in an enclosed canopy with 2 fans.

I would love to put in a 150k (love the shimmer) and two T5s with moons. Thoughts? Lights too close to water???

Thanks.
 
OldNemo said:
Any recommendations on a good 6 lamp retro kit?

The tank will be in my basement so it is cool and it will be about 5 in. above the water in an enclosed canopy with 2 fans.

I would love to put in a 150k (love the shimmer) and two T5s with moons. Thoughts? Lights too close to water???

Thanks.
Click to expand...

If the bottom of the reflector would be 5 inches from the top of the water you would be OK. If you only have 5 inches from the top of the tank to the top of the canopy I wouldn't try halides.

The Aqua Illuminations retrofitsd Reefgeek sells are good. So are the Ice Cap ones with the standard ballast and if the tank is over 24 inches tall the VHO version with Ice Cap ballasts.
 
I am setting up a 40 breeder with a TX5. What would be a good lamp setup? I am thinking

Actinic White
Aquablue Plus
Aquablue
Aquablue Plus
Actinic White
 
noboddi said:
I am setting up a 40 breeder with a TX5. What would be a good lamp setup? I am thinking

Actinic White
Aquablue Plus
Aquablue
Aquablue Plus
Actinic White
Click to expand...

Bad idea

Front
ATI Aquablue
ATI Blue Plus
UVL Actinic White
ATI Blue Plus
ATI Aquablue

That will leave you with the 2 blue plus for dusk/dawn and a 14K look with everything running.

Your mix would look pink and have a white dusk/dawn effect.
 
How does everyone go about changing their bulbs. Do you justbump the light period down? I don't want to shock my sps because there is about 3 hug colonys a couple inches from the water.
 
The Grim Reefer said:
If the bottom of the reflector would be 5 inches from the top of the water you would be OK. If you only have 5 inches from the top of the tank to the top of the canopy I wouldn't try halides.

The Aqua Illuminations retrofitsd Reefgeek sells are good. So are the Ice Cap ones with the standard ballast and if the tank is over 24 inches tall the VHO version with Ice Cap ballasts.
Click to expand...


Thanks. Actually, the bottom of the reflector would be about 7 to 8 in above the water. 175k Halide??

I just don't believe there is enough room for 6 T5s in the canopy.

So if one Halide then what do you recommend for two t5's on either side of the halide?

Thanks
 
Status
Not open for further replies.

Similar threads

Guygettnby
Stuck between 2 skimmers...
Replies
12
Views
1K
Guygettnby
Guygettnby
Timfish
More "Old" Reef Animals
Replies
5
Views
2K
Timfish
Timfish
sauceyreefOG
New (but old) Member - Hello!
Replies
12
Views
1K
Reefing102
Reefing102
E
Wave maker recommendations?
Replies
12
Views
1K
ExitTrauma
E
BigEZ77
DIY Plumbing Repair Options?
Replies
3
Views
1K
Uncle99
Uncle99
Back
Top