Tunze Compact Kit 16

[turbonemo]

Roger,

Does this kit come with all the tubing, adapters, etc to connect it to a normal (no overflow) aquarium? I have an Oceanic 45G Bow fyi.

Also, will a Stream 6060 and a Turbelle 1000/2 be too much (little) for my sw fish only setup?

Thanks.

 

[rvitko]

The drain and return lines you have to plumb yourself. It includes the return pump which uses 25mm PVC. We sell seperate plumbing kits but you can also use readily available PVC from the hardware store though some creativity is required to adapt from 25mm to 3/4"

 

[turbonemo]

Thanks Roger, but I'm still a bit confused. I the picture of the kit it seems that one hose is larger than the other. Yet, you mention only one size, the 25mm.

Could you kindly list for me the Tunze part no. for whatever else I need to buy to install the kit?

Also, can you advize on the pump question?


Thanks again!!!

 

[rvitko]

The larger hose is the drain. You need the overflow 1074/2, the drain hose 1075/2, the plumbing kit 1073.000 would eliminate the need for any adapters, it incudes enough 25mm PVC to do at least two installs. For an adapter to use 3/4", the easiest solution is a length of Eheim 25/32mm hose.

 

[turbonemo]

Thanks again!

Can you please advise if the one Stream 6060 and one Turbelle 1000/2 are too much (little) for my sw fish only setup?

Thanks.

 

[rvitko]

I don't think I would use a 6060, a 7400/2 or wait for the nano Streams. The 1000/2 would be fine.