tyohoon III?

[arizona tech]

i got this unit a week ago made some ro/di water and had a tds reading of 0, today i open the ff valve and di valve for a few minutes and go and make water the tds is at 70, crap,anybody have this problem before?, so i turn di and ff valves for 10 minutes and make water and get a 0 tds reading, do i have to flush the system like that every time? and what is a good ro tds reading?

 

[coolie]

As I understand, you are supposed to flush the line every time because the plastic tubing can cause the TDS to be high. I have no personal experience as I am hooking my Typhoon III up tonight.

 

[javajaws]

Hmmm...haven't had that problem...may want to call airwaterice and ask them. Did you open the DI bypass for 30-40 seconds after doing the FF like the manual recommends?

As for RO TDS...mine is around 3-4 TDS (75 GPD membrane).

 

[arizona tech]

<a href=showthread.php?s=&postid=6524710#post6524710 target=_blank>Originally posted</a> by javajaws
Hmmm...haven't had that problem...may want to call airwaterice and ask them. Did you open the DI bypass for 30-40 seconds after doing the FF like the manual recommends?

As for RO TDS...mine is around 3-4 TDS (75 GPD membrane).

in the manual it says open di bypass and fast flush valves at the same time.and let run 1-2 minutes of 3 or more days of non use. great unit i got tds down to 0 on ro/di if i open my ro valve i get like 70tds if i do di and ff valves the tds goes down,i am believing the previous post about the lines having to be blown out,plus the water sucks out here to

 

[javajaws]

My instructions say to open the DI bypass "right after you fast flush the unit"...which implies the FF should be closed before opening the DI bypass for 30-40 seconds.

 

[arizona tech]

<a href=showthread.php?s=&postid=6525001#post6525001 target=_blank>Originally posted</a> by javajaws
My instructions say to open the DI bypass "right after you fast flush the unit"...which implies the FF should be closed before opening the DI bypass for 30-40 seconds.

my jokes dont say that and i went to the web sit to find that cant but i e-mailed them today-so what you do is open ff valve for 30 seconds then you close it after 30 seconds then you open the di bypass for 30 seconds

 

[DamageInc]

I bought that system and could never get my ro tds below 34. Returned it and bought a Kent Marine Hi-S ro/di unit. Works much better.

 

[AZDesertRat]

How long did you let the unit run before testing the TDS. It needs to settle down a bit so wait a couple of minutes before testing. Also was you tester cleaned after the last round of testing and were you using a squeaky clean polished glass to test the water in?
I have never flushed my RO membrane in 7 years of use and have never had a problem even here in Phoenix where the TDS is horrible. My raw water TDS averages 600 to 800, RO only product water averages 8 to 13 and RO/DI stays at 0 fro around 200 gallons before I change the resin.
I get about 2+ years out of a membrane with very heavy use for drinking water, icemaker and aquarium water. I have yet to see any scientific evidence flushing a residential size membrane does anything at all except give you a warm and fuzzy.

 

[javajaws]

The online instructions say to open the FF and DI bypass at the same time only on startup or after 3 days of non-use. I don't ever do this.

The instructions included with my unit talk about using the FF before or after using the unit at any time (an optional step)...it says to open the FF (but doesn't say for how long). It says to then close the FF and then open the DI bypass for 30-40 seconds. Then make RO/DI water.

 

[arizona tech]

my instructions dont say that i tried doing what you said i opened my ff valve and get no pressure until i open my di bypass valve

 

[javajaws]

"no pressure"? You mean you don't get anything going out the waste line?

 

[arizona tech]

<a href=showthread.php?s=&postid=6525343#post6525343 target=_blank>Originally posted</a> by javajaws
"no pressure"? You mean you don't get anything going out the waste line?

yea, i did like you said i opened my di bypass for a while and took a tds reading of 30 i got i guess i should have let it purge it self for a couple of minutes longer, thank you a bunch,and do you do top offs with ro water or ro/di water

 

[AZDesertRat]

Always RO/DI. Even with the Typhoon III you will still have a TDS of between 8 and 15 or so around here. I hope you got the 75 GPD and not the 100 GPD. There is a major difference between the two with our water quality.

 

[javajaws]

Everything that goes into my tank is RO/DI only.

 

[javajaws]

I feel for you AZ guys...everytime I have to go there I think I'm gonna dry up into a raisin. Do you guys do anything with your waste water out there? Pond? Dump it into the lawn (if you even have one)? Mister?

 

[AZDesertRat]

Most wastewater in the Phoenix area is used as cooling water for the Palo Verde Nuclear Plant. Most smaller plants either do groundwater recharge or direct reuse on golf courses and green belts.

 

[arizona tech]

i got the 75 gpd the reason i got the unit is from az desert rat talking about it is a great unit

 

[AZDesertRat]

If you still have problems with it e-mail Walter at AWI. He is great at answering questions and will make things right if you do have any hardware problems.

 

[tack-msv]

What happens if you turn on the fast flush and forget to turn it off for a few hours. Does it compromise the membrane?

 

[TBone303]

I don't mess with the fast flush, every time I use it my TDS goes up, I wish Air water and Ice would give you better instructions of how to use their equipment.