Upgrade to ~300g In-Wall

B

bpnages25

New member
Hi guys,

I currently have a 220g mixed reef, it's been up and running for a little over 2 years now. It has gone through its ups and downs just like any tank. However, I'm doing a large basement renovation and that means the opportunity to upgrade my tank. Going to try and make it as clean and automated as possible.

I ordered a 75" x 30 x 24 from Miracle aquarium several weeks ago and it should be shipping out by next week. Also, ordered an acrylic sump from Elite Aquatics which is also shipping next week.

Many pictures to come. Will attach design specs for sump and tank as well. I welcome any comments or opinions.
 
Basement Demo

Basement Demo

<a href="http://s1287.photobucket.com/user/bpnages25/media/IMG_1704_zpsmkui3iwn.jpg.html" target="_blank"><img src="http://i1287.photobucket.com/albums/a630/bpnages25/IMG_1704_zpsmkui3iwn.jpg" border="0" alt=" photo IMG_1704_zpsmkui3iwn.jpg"/></a>

<a href="http://s1287.photobucket.com/user/bpnages25/media/IMG_1703_zpshavjlxfv.jpg.html" target="_blank"><img src="http://i1287.photobucket.com/albums/a630/bpnages25/IMG_1703_zpshavjlxfv.jpg" border="0" alt=" photo IMG_1703_zpshavjlxfv.jpg"/></a>

<a href="http://s1287.photobucket.com/user/bpnages25/media/IMG_1702_zpsvzp6db3y.jpg.html" target="_blank"><img src="http://i1287.photobucket.com/albums/a630/bpnages25/IMG_1702_zpsvzp6db3y.jpg" border="0" alt=" photo IMG_1702_zpsvzp6db3y.jpg"/></a>
 
Tank & Sump

Tank & Sump

<a href="http://s1287.photobucket.com/user/bpnages25/media/IMG_1700_zpslbkz73w1.jpg.html" target="_blank"><img src="http://i1287.photobucket.com/albums/a630/bpnages25/IMG_1700_zpslbkz73w1.jpg" border="0" alt=" photo IMG_1700_zpslbkz73w1.jpg"/></a>

<a href="http://s1287.photobucket.com/user/bpnages25/media/IMG_1717_zpsu58ajst7.jpg.html" target="_blank"><img src="http://i1287.photobucket.com/albums/a630/bpnages25/IMG_1717_zpsu58ajst7.jpg" border="0" alt=" photo IMG_1717_zpsu58ajst7.jpg"/></a>

<a href="http://s1287.photobucket.com/user/bpnages25/media/IMG_1726_zpssygq7p5x.jpg.html" target="_blank"><img src="http://i1287.photobucket.com/albums/a630/bpnages25/IMG_1726_zpssygq7p5x.jpg" border="0" alt=" photo IMG_1726_zpssygq7p5x.jpg"/></a>

<a href="http://s1287.photobucket.com/user/bpnages25/media/IMG_1776_zpsubzc92er.jpg.html" target="_blank"><img src="http://i1287.photobucket.com/albums/a630/bpnages25/IMG_1776_zpsubzc92er.jpg" border="0" alt=" photo IMG_1776_zpsubzc92er.jpg"/></a>
 
This is where the tank will be going. A wall will be put up making it flush with the front of the tank. There will be ~6 feet of space behind the tank

<a href="http://s1287.photobucket.com/user/bpnages25/media/IMG_1797_zps5bpawzsz.jpg.html" target="_blank"><img src="http://i1287.photobucket.com/albums/a630/bpnages25/IMG_1797_zps5bpawzsz.jpg" border="0" alt=" photo IMG_1797_zps5bpawzsz.jpg"/></a>

<a href="http://s1287.photobucket.com/user/bpnages25/media/IMG_1798_zpsnxagwcof.jpg.html" target="_blank"><img src="http://i1287.photobucket.com/albums/a630/bpnages25/IMG_1798_zpsnxagwcof.jpg" border="0" alt=" photo IMG_1798_zpsnxagwcof.jpg"/></a>
 
Pic of the sump

Pic of the sump

Tyler at Elite Aquatics is almost done with the sump. Measures 48" x 30" x 24"

<a href="http://s1287.photobucket.com/user/bpnages25/media/11231688_1007546929258048_1824192596567105374_n-1_zpsipsdydx3.jpg.html" target="_blank"><img src="http://i1287.photobucket.com/albums/a630/bpnages25/11231688_1007546929258048_1824192596567105374_n-1_zpsipsdydx3.jpg" border="0" alt=" photo 11231688_1007546929258048_1824192596567105374_n-1_zpsipsdydx3.jpg"/></a>
 
I currently have a reef octopus EXT-3000 on my old tank. I'm wondering if this will be enough for upgrade given that it will have close to 400g total volume?

If not, do I invest in another skimmer and run both of them at the same time?
 
Tank Arrives

Tank Arrives

<a href="http://s1287.photobucket.com/user/bpnages25/media/IMG_6723_zpsopzddkji.jpg.html" target="_blank"><img src="http://i1287.photobucket.com/albums/a630/bpnages25/IMG_6723_zpsopzddkji.jpg" border="0" alt=" photo IMG_6723_zpsopzddkji.jpg"/></a>

<a href="http://s1287.photobucket.com/user/bpnages25/media/IMG_6745_zpskygtycct.jpg.html" target="_blank"><img src="http://i1287.photobucket.com/albums/a630/bpnages25/IMG_6745_zpskygtycct.jpg" border="0" alt=" photo IMG_6745_zpskygtycct.jpg"/></a>

<a href="http://s1287.photobucket.com/user/bpnages25/media/IMG_6747_zpslmlmncgf.jpg.html" target="_blank"><img src="http://i1287.photobucket.com/albums/a630/bpnages25/IMG_6747_zpslmlmncgf.jpg" border="0" alt=" photo IMG_6747_zpslmlmncgf.jpg"/></a>
 
Tank was a lot heavier than I expected. Had some scares getting it down the stairs.

<a href="http://s1287.photobucket.com/user/bpnages25/media/IMG_3462_zpsw69cpa6c.jpg.html" target="_blank"><img src="http://i1287.photobucket.com/albums/a630/bpnages25/IMG_3462_zpsw69cpa6c.jpg" border="0" alt=" photo IMG_3462_zpsw69cpa6c.jpg"/></a>

<a href="http://s1287.photobucket.com/user/bpnages25/media/IMG_3465_zpsjznoctvo.jpg.html" target="_blank"><img src="http://i1287.photobucket.com/albums/a630/bpnages25/IMG_3465_zpsjznoctvo.jpg" border="0" alt=" photo IMG_3465_zpsjznoctvo.jpg"/></a>

Tank in place
<a href="http://s1287.photobucket.com/user/bpnages25/media/IMG_6761_zpsjplbdrua.jpg.html" target="_blank"><img src="http://i1287.photobucket.com/albums/a630/bpnages25/IMG_6761_zpsjplbdrua.jpg" border="0" alt=" photo IMG_6761_zpsjplbdrua.jpg"/></a>
 
One of many BRS orders..
<a href="http://s1287.photobucket.com/user/bpnages25/media/IMG_6737_zpsu5uq2iq0.jpg.html" target="_blank"><img src="http://i1287.photobucket.com/albums/a630/bpnages25/IMG_6737_zpsu5uq2iq0.jpg" border="0" alt=" photo IMG_6737_zpsu5uq2iq0.jpg"/></a>
 
Finished plumbing the closed loop. Here are a couple pictures of how it looks. Let me know what you guys think or any suggestions that you may have

<a href="http://s1287.photobucket.com/user/bpnages25/media/IMG_6806_zpsoqzwuo3e.jpg.html" target="_blank"><img src="http://i1287.photobucket.com/albums/a630/bpnages25/IMG_6806_zpsoqzwuo3e.jpg" border="0" alt=" photo IMG_6806_zpsoqzwuo3e.jpg"/></a>

<a href="http://s1287.photobucket.com/user/bpnages25/media/IMG_6807_zpsc21wy0pq.jpg.html" target="_blank"><img src="http://i1287.photobucket.com/albums/a630/bpnages25/IMG_6807_zpsc21wy0pq.jpg" border="0" alt=" photo IMG_6807_zpsc21wy0pq.jpg"/></a>

<a href="http://s1287.photobucket.com/user/bpnages25/media/IMG_6808_zpsyqnuqb50.jpg.html" target="_blank"><img src="http://i1287.photobucket.com/albums/a630/bpnages25/IMG_6808_zpsyqnuqb50.jpg" border="0" alt=" photo IMG_6808_zpsyqnuqb50.jpg"/></a>


As you can see to the left of the tank I built a stand where my sump is going to be. I tried to make the stand as big as possible. What do you guys think of everything?

<a href="http://s1287.photobucket.com/user/bpnages25/media/IMG_6815_zpsny84wfxu.jpg.html" target="_blank"><img src="http://i1287.photobucket.com/albums/a630/bpnages25/IMG_6815_zpsny84wfxu.jpg" border="0" alt=" photo IMG_6815_zpsny84wfxu.jpg"/></a>
 
Has anyone had experience running your protein skimmer off of a manifold?

Planning on having a separate external pump to run Carbon and biopellet reactors, UV, and skimmer(s).

Also any ideas on how to plump biopellet reactor directly into skimmer when using external pump to feed skimmer?
 
Filled the tank with RO/DI to test out the closed loop.
<a href="http://s1287.photobucket.com/user/bpnages25/media/IMG_1893_zpshaaycvzd.jpg.html" target="_blank"><img src="http://i1287.photobucket.com/albums/a630/bpnages25/IMG_1893_zpshaaycvzd.jpg" border="0" alt=" photo IMG_1893_zpshaaycvzd.jpg"/></a>

<a href="http://s1287.photobucket.com/user/bpnages25/media/IMG_6942_zpsz3fdfrft.jpg.html" target="_blank"><img src="http://i1287.photobucket.com/albums/a630/bpnages25/IMG_6942_zpsz3fdfrft.jpg" border="0" alt=" photo IMG_6942_zpsz3fdfrft.jpg"/></a>

<a href="http://s1287.photobucket.com/user/bpnages25/media/IMG_6931_zpssvd8wpa8.jpg.html" target="_blank"><img src="http://i1287.photobucket.com/albums/a630/bpnages25/IMG_6931_zpssvd8wpa8.jpg" border="0" alt=" photo IMG_6931_zpssvd8wpa8.jpg"/></a>

There ended up being a leak between the male adapter and the reeflo intake. I used teflon tape but did some research after to find its better to use paste?
 
Added a couple coats of poly to the sump stand.

<a href="http://s1287.photobucket.com/user/bpnages25/media/IMG_6945_zpswabodbkj.jpg.html" target="_blank"><img src="http://i1287.photobucket.com/albums/a630/bpnages25/IMG_6945_zpswabodbkj.jpg" border="0" alt=" photo IMG_6945_zpswabodbkj.jpg"/></a>
 
Any recommendation for an external pump to run manifold? (3 reactors & protein Skimmer). Ordering the SRO-5000EXT (requires feed pump ~900 GPH)

Was thinking about just getting a panworld. Opinions/suggestions?
 
You must log in or register to reply here.

Similar threads

adova
300g DIY Acrylic Tank Recommendations
Replies
5
Views
339
griss
griss
K
upgrading tank and need more info
2
Replies
27
Views
747
wvned
wvned
P
DIY Hang on back Sump Tank
Replies
14
Views
493
kharmaguru
kharmaguru
jbraslins
Automated RODI/Salt mixing station with 2 50 gal reservoirs in uninsulated garage?
Replies
7
Views
393
griss
griss
R
Cyano and nutrients
2
Replies
22
Views
546
Radicalrob1982
R
Back
Top