Wavebox and TS24 setup recommendation

[reef_doug]

I have a wavebox and TS24. How would be the best to set up both?

I know there are all sorts of options, but wonder what most people do with these two products together.

Should I operate independently or use slave and set the ext jumper on the 6091?
If using slave, were should the wavebox slave din plug into on the 7095 (1b or 2b?)

Should the 6100s be in each of the back corners facing towards the center front pane, or one in a back corner and the other oposite in the front corner creating a circular flow?

Photo cell for wavebox?

Moon light & photo cell for 7095?

7095 settings, Pulse, Interval 1 or Interval 2?

BTW tank is 72x24x24, wavebox mounted at one end, should it be centered or cornered on the end?

Thanks
Doug

 

[rvitko]

I would operate them independently. I don't use the photocell on the wavebox, the only real reason to use it is if it is too much noise for you at night. I would use night mode and moolight on the 7095. Interval 2 is my preference. Wavebox placement is largely based on where the wavebox can get a clear shot to the far end of the tank. Usually a front or back corner is best, it should have minimal obstructions to the far end of the tank.

 

[reef_doug]

Thanks Roger, I think I'll use I-2 also.

Would you recommend the 2 x 6100s be placed in each of the back corners facing towards the center front pane, or one in a back corner and the other oposite in the front corner creating a circular flow?

 

[rvitko]

It is largely trial and error but for aesthetic reasons most people place both in back corners and alternate which one is running at full power and it does create a circular current from the deflected flow.