75 gallon mixed reef build

There should be a thread in the diy section. In here. Look through it. You'll fine more info than what I could provide
 
So after talking to Floyd I'm going to add a drain to the bottom of my ATS. I guess you can end up with vacuum lock with side drains like what I have. I'll have to pick up a bulk head. I want to see how big a 1" is. It looks like it maybe a tight fit. If it's to tight I'll go with two 3/4" drains. I know two smaller drains like that is not ideal but I think I will be fine. The flow is going to be pretty low and at that point I would have 4 drains.
 
Last edited:
Cut a hole in the top of the barrels for my water storage also add the float switch I had to one of them. I need to pick up another float switch and some PVC.



 
Got my Marine Pure blocks. They fit nice in sump #1. I'm going to put the heaters in that sump as well.

 
Ordered some parts for my ATS and my mixing station. Will probably finish off ATS next week and water test it. Will also work on the mixing station some more and post pictures. Hope everyone had a good few days off.
 
Finshed up my ATS. Just need to wet test it. As recommended by people I added a drain to the bottom of the ATS.







 
You must log in or register to reply here.

Similar threads

Entropy
90-gallon getting back into the hobby tank...
2 3
Replies
42
Views
1K
Entropy
Entropy
B
  • Article Article
My newly built 300 gallon by my 20 yr experienced tank builder...silicone question
2
Replies
21
Views
393
JaysTank
J
S
200 Gallon Mixed Reef - Rock Questions
2
Replies
20
Views
556
wvned
wvned
oceangopher
Tankpocalypse Now
Replies
2
Views
160
Reefing102
Reefing102
slathrum
Where to buy a reef ready aquarium these days
Replies
8
Views
316
wvned
wvned
Back
Top