A Reefaholic's 1000+ Gallon Mixed Reef System Build

[Dustin1300]

I knew I'd get some of these responses when I posted the "size comparison" pics!

:ape:

 

[Made2Rock]

I knew I'd get some of these responses when I posted the "size comparison" pics!

:ape:

Is it true size matters ????????????????????

Remember we are talking about the pair Dustin got

Joe

 

[aquanooby]

Wow ... just wow

 

[drummereef]

I'm going to go out on a limb and say that thing is going to make some serious stank.

 

[Dustin1300]

I'm going to go out on a limb and say that thing is going to make some serious stank.

Agreed Brett, that top collection cup cover is going to have a vent that goes outside for that "serious stank".

 

[Dustin1300]

Got some goods in today.

Novus kit for cleaning up the acrylic. Waiting on the buffing kit to get it going soon.

25 lb CO2 tank for CR.

Breaker Panel ready for some work to have circuits complete. Need to finish off this and then can focus on next step in project...

 

[Dustin1300]

Looking for a solid regulator for CR. Anyone have a recommendation? I've always used two part in past and CR is a new realm but not that complex of a concept...

Here's some I'm looking at:

Reef Fanatic Deluxe

Aquatic Life Regulator

They both seem to have good reviews, just looking for some advice. If you have another you'd recommend please do share.

 

[Newbie Aquarist]

Try this one.

http://www.aquariumplants.com/CarbonDoser_Electronic_Co2_Regulator_p/co2.htm

 

[Newbie Aquarist]

CO2 Regulator

CO2 Regulator

Try this one.

http://www.aquariumplants.com/CarbonDoser_Electronic_Co2_Regulator_p/co2.htm

 

[Dustin1300]

I've seen these. Are the electronic ones that much better than the needlevalve adjustment?

 

[Newbie Aquarist]

Yes sir they are. I've seen a few up front and they even have a dial so you can control the drops. I will be purchasing one.


Sent from my iPhone using Siri and Tapatalk.

 

[Dustin1300]

Got off work late tonight so did not get as much accomplished as I wanted...

Sub-Panel has power and got a couple of the circuits ran and 8 receptacles ran. Each one has a GFI outlet so whole circuit is GFI protected. Should be able to wrap up all the electrical this week and then to the next project

Panel partially wired.

Drops.

Need gray double covers that have GFI/Regular Outlets and need to find some online? Lowes does not carry them and hopefully I can find

 

[Marc]

This is a killer build! Can't wait to see that skimmer in action!

 

[Dustin1300]

This is a killer build! Can't wait to see that skimmer in action!

Appreciate the vote of confidence:thumbsup:

I'm more ready than anyone to have that skimmer in action but have I'm getting closer and closer. I know my build has been longer than many but I've just bought the equipment when I have the spare cash so that's slowed things down a bit!

 

[.Marshall]

Are you not going to sheet rock the wall the tank sits flush on?

 

[Dustin1300]

Are you not going to sheet rock the wall the tank sit flush on?

No plans for that on the inside of the fish room. All insulation and the whole room is locked in by either the foundation or 8 mm plastic on the walls to keep moisture locked in for the most part. Also plan on using air exchanger and dehumidfier to keep things in check.

 

[Dustin1300]

Buffing kit in for the acrylic. I also ordered 1"x2" acrylic to re-enforce bottom around edges of aquarium for my paranoia. Bought last night and just got tracking number so those should be delivered tomorrow so I can knock out this weekend. Fumes might kill me being in tank with them but sure it'll be a fun time.

 

[Newbie Aquarist]

Are you going to use the drill or a DA sander?

 

[Dustin1300]

Are you going to use the drill or a DA sander?

Right now plan on using drill. After testing on frag tank will see!

Sent from my Samsung Galaxy S3 using Tapatalk 2.

 

[Newbie Aquarist]

Practice is good. I wish I went that route.