jglackin
New member
I have been trying to update the firmware on my ACIII Pro for about an hour. I have read through the 20+ page thread on the Beta and I still cannot figure this out. I have tried both Option A and Option B and neither seem to work.
Option A:
Launch:
Ready...
TFTP Daemon Binding to 192.168.2.44
Click update firmware:
AquaController Update Firmware starting...
Error at socket(): 10060
Option B:
Shut off DHCP.
Set IP address for computer to 192.168.37.
Starting pool: 192.168.2.25
Size of pool: 10
Boot File: Aqua.bin
Mask: 255.255.255.0
Launch ac3loader:
Ready...
TFTP Daemon Binding to 192.168.2.37
Power cycle ACIII Pro:
Select Update Flash
AquaController Update Firmware starting...
Error at socket(): 10065
I have tried everything. What am I missing?
Option A:
Launch:
Ready...
TFTP Daemon Binding to 192.168.2.44
Click update firmware:
AquaController Update Firmware starting...
Error at socket(): 10060
Option B:
Shut off DHCP.
Set IP address for computer to 192.168.37.
Starting pool: 192.168.2.25
Size of pool: 10
Boot File: Aqua.bin
Mask: 255.255.255.0
Launch ac3loader:
Ready...
TFTP Daemon Binding to 192.168.2.37
Power cycle ACIII Pro:
Select Update Flash
AquaController Update Firmware starting...
Error at socket(): 10065
I have tried everything. What am I missing?
Last edited: