All reefers in NC & SC
- Thread starter JohnL
- Start date
- Status
my new acrylic frag table
my new acrylic frag table
I know you'll have heard me talking about my new frag table I been working on. Well I finaly got all my acrylic in and started glueing it all up. Its 4'x4'x1' , I'm using 3/8" because the stand I'm going to build will have a full plywood bottom and 2"x6" side so I'm not worried about bowing plus I'm putting 2" euro rails all along the top edges of the acrylic. I glued up the bottom and side yesterday and will finish the corners today. I will be making and selling these for pick up only in either 2'x4'x1'x3/8" or 1/2" and sumps as well or if you need the acrylic cut to your spec's I can do that as well. Give me a shout or drop by and come see it.
come visit me at carolina-corals.com
my new acrylic frag table
I know you'll have heard me talking about my new frag table I been working on. Well I finaly got all my acrylic in and started glueing it all up. Its 4'x4'x1' , I'm using 3/8" because the stand I'm going to build will have a full plywood bottom and 2"x6" side so I'm not worried about bowing plus I'm putting 2" euro rails all along the top edges of the acrylic. I glued up the bottom and side yesterday and will finish the corners today. I will be making and selling these for pick up only in either 2'x4'x1'x3/8" or 1/2" and sumps as well or if you need the acrylic cut to your spec's I can do that as well. Give me a shout or drop by and come see it.
come visit me at carolina-corals.com
Electrobes
Montipora type guy
Are you using the pin method for the contruction of the tank, or just the taped method alone?
Electrobes
Montipora type guy
Basically you take regular pin heads (Used for sowing I believe) and place it in between the two pieces of acrylic you want to join together. As you go gluing you kind of jump over the pins (every 6 inches) and then return to them 30 seconds later to pull it out, and glue it. The space in between apparently yields reliable seams.
This is the very short version, a search on google will show you a more detailed version.
This is the very short version, a search on google will show you a more detailed version.
up date on frag table
up date on frag table
Well I finished glueing it all up and water tested it. I found 3 little pin hole leaks so I had to go back and fix those. I did change my mind and go with a 4" eruo rail all one piece instead of 2" separate pieces. So I,ve now had it filled to 2" from the top for 3 days now and no leaks and even more satisfying no sign of any bowing whatsoever none!!![ boy I want to say I told you so to all those that said it would but I won't] Now its time for the plumbing and sump and stand. I'll keep you posted.
I'll keep you up to date and if your in greensboro drop by and check it out , I've got tons of frags to fill it with so I'll be posting more pic's of that as well, Dave E
up date on frag table
Well I finished glueing it all up and water tested it. I found 3 little pin hole leaks so I had to go back and fix those. I did change my mind and go with a 4" eruo rail all one piece instead of 2" separate pieces. So I,ve now had it filled to 2" from the top for 3 days now and no leaks and even more satisfying no sign of any bowing whatsoever none!!![ boy I want to say I told you so to all those that said it would but I won't] Now its time for the plumbing and sump and stand. I'll keep you posted.
I'll keep you up to date and if your in greensboro drop by and check it out , I've got tons of frags to fill it with so I'll be posting more pic's of that as well, Dave E
Electrobes
Montipora type guy
Looks good are you going to polish the edges?
Electrobes
Montipora type guy
You should try polishing the ends of the finished tank, it'll look spectacular and is easy to do.
gary faulkner
New member
Looking great, Dave. Can't wait to see it all filled up with coral.
Did you leak test it on that nice wood floor? You're braver than me!
Did you leak test it on that nice wood floor? You're braver than me!
Re: up date on frag table
Re: up date on frag table
Dave, I believe in your original design you spec'd out 2" euro rails which were actually going to cross one another but it looks like the you changed up.... going with 4" one piece top euro? I am sure this added to the strength of the tank. What made you switch your design? Btw...looks great.
Re: up date on frag table
<a href=showthread.php?s=&postid=12571542#post12571542 target=_blank>Originally posted</a> by dne63
Well I finished glueing it all up and water tested it. I found 3 little pin hole leaks so I had to go back and fix those. I did change my mind and go with a 4" eruo rail all one piece instead of 2" separate pieces. So I,ve now had it filled to 2" from the top for 3 days now and no leaks and even more satisfying no sign of any bowing whatsoever none!!![ boy I want to say I told you so to all those that said it would but I won't] Now its time for the plumbing and sump and stand. I'll keep you posted.
I'll keep you up to date and if your in greensboro drop by and check it out , I've got tons of frags to fill it with so I'll be posting more pic's of that as well, Dave E
Dave, I believe in your original design you spec'd out 2" euro rails which were actually going to cross one another but it looks like the you changed up.... going with 4" one piece top euro? I am sure this added to the strength of the tank. What made you switch your design? Btw...looks great.
ReefEnabler
Premium Member
Hey everybody,
My tank is being shipped tomorrow! They told me they think it will only take one day, but I need to confirm it with the freight company's local hub. It will either be wednesday or thursday evening.
Is there anybody around the Cary/Raleigh area that might be available either of those days to help move a 220 into my house
You will be rewarded with beer and pizza aplenty.
My tank is being shipped tomorrow! They told me they think it will only take one day, but I need to confirm it with the freight company's local hub. It will either be wednesday or thursday evening.
Is there anybody around the Cary/Raleigh area that might be available either of those days to help move a 220 into my house
You will be rewarded with beer and pizza aplenty.
ReefEnabler
Premium Member
Thanks Ron.
They just called me and its going to be thursday. Tomorrow they will give me a better time window but hopefully it works out.
I already got 6 suction cup lifters so I think it should be plenty. Also got some WO40 for you if you want it.
Ryan
They just called me and its going to be thursday. Tomorrow they will give me a better time window but hopefully it works out.
I already got 6 suction cup lifters so I think it should be plenty. Also got some WO40 for you if you want it.
Ryan
This thread was automatically split due to performance issues. You can find the rest of the thread here: http://reefcentral.com/forums/showthread.php?threadid=1394947
- Status
Similar threads
