Anyone have a used Reeflo Swordtail or Panworld 150PS?

[keh9qd]

I purchased a Gen-X PCX70HP from a Slash member last year and it has served me well for a year on my basement sump setup. Im not going to try to describe my system but Im making some changes and had a couple of goals in the process for my pump:

1. Lower wattage
2. Noise/vibration decrease
3. Have a spare pump

The two pumps on my radar are:

Panworld 150PS
Reeflo Swordtail

Does anyone have any suggestions, advice, or a pump for sale?

 

[Ccoffel81]

Anyone have a used Reeflo Swordtail or Panworld 150PS?

I put my panworld on a 1" styrofoam insulation and run a little less than 3/4 open with a ball valve little heat people won't believe me but no noise

It's a 100px-x don't know what you want for flow max is 1270gph. But ball valve reduction =less heat and flow

Sent from my iPhone using Tapatalk

 

[keh9qd]

I put my panworld on a 1" styrofoam insulation and run a little less than 3/4 open with a ball valve little heat people won't believe me but no noise

Sent from my iPhone using Tapatalk

By running at 3/4 throttle will it consume less watrage?

 

[Ccoffel81]

By running at 3/4 throttle will it consume less watrage?

Yes a simple solution that I learned this summer.


Sent from my iPhone using Tapatalk

 

[Ccoffel81]

Yes a simple solution that I learned this summer.


Sent from my iPhone using Tapatalk

My pump was almost too hot to touch backed it down it cooled off quickly. Any speed less than full will see a reduction in heat. I would suggest getting bigger than you need back it down and if you upgrade later ie: any new reconciliation devices in Sump or bigger tank you will have pump already. Mine is a 100px-x it runs a 220 reef 1260gph.


Sent from my iPhone using Tapatalk

 

[Jordan Kutun]

I have a pump for sale


Sent from my iPhone using Tapatalk

 

[keh9qd]

I have a pump for sale


Sent from my iPhone using Tapatalk

What pump is it?

 

[keh9qd]

I see them, thanks for the offer but not exactly what I need