anyone tried to using Jebo WP40?

I'm not sure if I'm right or not but after looking into the Digital Aquatics "solution"/module, it looks like you have to have both the APC module and their new DC1 (not yet released). I sent an email to double check this but if that's true and you are like me and don't have either the APC or the DC1, it will run you $190 plus tax and shipping to be able to control the WP pumps! I have an email out to DA now to confirm. I hope I'm wrong but if I'm right then who in their right mind would do that? At that price buy a vortech...completely defeats the purpose of buying the WP pumps to begin with. If anyone on here has any additional info or can correct me if I'm wrong, please let me know.
 
kentuckyclowns said:
I'm not sure if I'm right or not but after looking into the Digital Aquatics "solution"/module, it looks like you have to have both the APC module and their new DC1 (not yet released).
Click to expand...

You are correct. There face book page mentioned a package price of $179.99 For both the APC and DC1. But for that price I can buy another twin controller PLUS 2 more Pumps.

I was really hoping the price point would be better. Would make sense for anyone that already has an APC. But otherwise it's pretty pricey
 
Wow...that's bad. I was hoping I was wrong but that's pretty disappointing. After my bad experience with the release of the SL2 and salinity probe issues and the horribly difficult Net Module, this is probably my last straw with DA. Reading on here where competitors are pricing out $25 wire harnesses and they are charging $180!!....crazy...sad day but looks like I will be researching a new controller!
 
kentuckyclowns said:
I'm not sure if I'm right or not but after looking into the Digital Aquatics "solution"/module, it looks like you have to have both the APC module and their new DC1 (not yet released). I sent an email to double check this but if that's true and you are like me and don't have either the APC or the DC1, it will run you $190 plus tax and shipping to be able to control the WP pumps! I have an email out to DA now to confirm. I hope I'm wrong but if I'm right then who in their right mind would do that? At that price buy a vortech...completely defeats the purpose of buying the WP pumps to begin with. If anyone on here has any additional info or can correct me if I'm wrong, please let me know.
Click to expand...

Completely agree! This is another module that will sit on the shelf. What a waste of research efforts and money by DA.
 
Been reading a few of the threads on the wp40's and 25's. Just noticed some new models came out. Can someone make a recommendation for which pumps I should get for my 48" 120g display tank? I would like the dual controller but I think 2 40's would be overkill? I'm also setting up a 48"x24"x12" frag tank and was wondering whether I could pull off the wp25 or a wp10.
Any suggestions would be great!
 
Yeah I had one die after I cleaned it. I think I damaged something disassembling it. It would try to move but wouldn't spin.. It lasted about a year. Bought another one tho why not only $80
 
Genius said:
Been reading a few of the threads on the wp40's and 25's. Just noticed some new models came out. Can someone make a recommendation for which pumps I should get for my 48" 120g display tank? I would like the dual controller but I think 2 40's would be overkill? I'm also setting up a 48"x24"x12" frag tank and was wondering whether I could pull off the wp25 or a wp10.
Any suggestions would be great!
Click to expand...

I would do a 40 and a 25 if you wanted a lot of flow. (Sps) I have a 40 in my 75 and its plenty
For the frag the 25 would be good in my opinion since there are just frags in it.
 
delmo said:
Don`t know if its been mentioned, but Digital Aquatics has a Jebao module coming out that plugs into their APC module. its on their FB page.
Click to expand...

Yes, it's the DC1 that plugs into the APC module, so you would need both.
It sucks, but if you have a ton already invested into DA, then you're kinda stuck. So I can pay $179 now or $1,000 to get the equivalent of what I currently have with DA from Neptune, or $1,500 with Reef Angel, or $1,500 from puratek (a local outfit with WAY more cool options, like flow sensors, non-intrusive level sensors, ip cameras,etc.)

If I were to change, it would obviously be to Puratek, but unless I hit the lottery or finally claim my lost inheritance from the Republic of Zamoonda, I can't change right now. (and that's obviously what DA's counting on)
 
Last edited:
Genius said:
Been reading a few of the threads on the wp40's and 25's. Just noticed some new models came out. Can someone make a recommendation for which pumps I should get for my 48" 120g display tank? I would like the dual controller but I think 2 40's would be overkill? I'm also setting up a 48"x24"x12" frag tank and was wondering whether I could pull off the wp25 or a wp10.

Any suggestions would be great!
Click to expand...


I have two WP-40s on my 120, 48" tank and I would defiantly say it is not over kill. I now have both on full power, one set to W3 and the other W1. I get the gentle side to side motion wave, and chaotic water movement with this set up. Very pleased.
 
Thx for the replies. After seeing a couple YouTube videos of the 40's, pretty intense, I'm leaning towards a 40 and 25.
Thx again!
 
Genius said:
I'm not very good at gluing my corals down and keep picturing zoo's flying around my tank.
Click to expand...


Nothing in my tank is glued down except a Monti is glued to the overflow and nothing has budged. I don't know why everyone seems to think it's too much flow. For me is just right and they are at max power. But hey! Buy what you want.
 
Anyone know where to got a new night sensor? When I opened mine up, I didn't notice a sensor, prolly dropped it. I prefer a sensor that is about 5 feet long, so I can put the sensor in the canopy, and the controller in the stand.
 
I have a 100 gal tank, 60x18x24. C2C over flow. First timer. How should I place 2 Jebao WP40?

I was thinking having them on each side of the tank. One at perfect mid tank pointing slightly up and in front of live rocks. The other one about 1/3 upper tank, pointing toward the top, behind the live rocks.

suggestions?
 
m0nkie said:
I have a 100 gal tank, 60x18x24. C2C over flow. First timer. How should I place 2 Jebao WP40?

I was thinking having them on each side of the tank. One at perfect mid tank pointing slightly up and in front of live rocks. The other one about 1/3 upper tank, pointing toward the top, behind the live rocks.

suggestions?
Click to expand...


That sounds good. I think you should go with that then make adjustments so that you don't have any dead spots. Mine are at far ends of the tank, they don't point directly at each other one points to the back and forces water behind the rocks and the other kinda points in the middle. The two power heads current smash into each other in the middle of the system and this crests a nice chaotic flow and no dead spots. Very happy with the flow.
 
I didn't want to read through 181 pages here. So I thought it would simple to ask

I have a 180 reef tank, with a WP40 and WP 25 on the otherwise

Any mods to hook both up to my Apex controller ?

I also have a rimless 57 I'm starting, and like to run the powerhead through the Apex on that one also. Just not sure if I'm going to go with. 25 or 40 on that tank yet
 
fltekdiver said:
I didn't want to read through 181 pages here. So I thought it would simple to ask

I have a 180 reef tank, with a WP40 and WP 25 on the otherwise

Any mods to hook both up to my Apex controller ?

I also have a rimless 57 I'm starting, and like to run the powerhead through the Apex on that one also. Just not sure if I'm going to go with. 25 or 40 on that tank yet
Click to expand...

Yep, but you have to make the cable yourself or there is someone selling them on ebay. If you want to make them you can use the Jebao reefangle cables and modify them. If you search you will find threads on how to do it. I made mine myself because it was before they were listed on ebay. It cost me a little more to make mine than he is selling them for. The ebay sellers name is markpelt2009. Search Apex Jebao Cable and it should come up.
 
You must log in or register to reply here.

Similar threads

P
Wave maker pump problem
Replies
1
Views
1K
rvitko
rvitko
P
Maxspect Gyre 300 series and ICV6 review
Replies
7
Views
4K
pisanoal
P
C
alternating flow on tunze 3 with y cable
Replies
10
Views
2K
rvitko
rvitko
slief
New Spectrapure Ultra Precise Top Off System. Good for Calcium Reactor Feed Pump Too
Replies
1
Views
674
slief
slief
A
water flow wave makers
Replies
1
Views
424
thegrun
T
Back
Top