ATI Powermodule Hybrid Club
- Thread starter rodneyri
- Start date
Keith@ ATI NA
Member
Not that I am aware of, but they happily ship across the pond.
Keith@ ATI NA
Member
What size fixture is it?
For what it is worth, we do special order white and silver LED Powermodules for users in USA which allows us to then support the warranty needs of the item.
Keith@ ATI NA
Member
10amp cord is no problem. I think you will be fine although I don't know if there are any other differences. If you had bought an 80w fixture you would have been in for a real headache!
rtparty
Raise The Reef!
Only when the temp reaches a certain level IIRC.
theshaman
Member
theshaman
Member
Ok. I checked again and all the fans again. All but one are working. It's the one over the right led cluster.
Have any of you guys replaced the led fans before? I know the t5 fans are really easy cause there's only two screws to remove.
The led fans look like you have to open up the fixture.
Sent from my iPhone using Tapatalk
rtparty
Raise The Reef!
Sorry, I don't know anything about that. Hopefully ATI will chime in
Dennis Gubbels
New member
Hello
Unit is 0% on T5 and still flashing what's wrong ?
Verstuurd vanaf mijn SM-N950F met Tapatalk
Unit is 0% on T5 and still flashing what's wrong ?
Verstuurd vanaf mijn SM-N950F met Tapatalk
They usually include a nice hanging kit. The kit includes cables, drywall anchors, and stud/joist anchors. Tap into ceiling studs/joist if possible. These fixtures are heavy. Only thing you will need to supply are wood screws if using the studs/joist method.
Keith@ ATI NA
Member
Your fan is likely not working because your factory settings are incorrect. If you follow the steps in this video it will likely fix the issue. It is not likely to be a fan problem.
https://www.youtube.com/watch?v=Sian2sc693A&t
It could also be this, but not as likely:
https://www.youtube.com/watch?v=ow3y21PGt5o&t
And bsme is correct, all ATI Fixtures include a hanging kit
https://www.youtube.com/watch?v=Sian2sc693A&t
It could also be this, but not as likely:
https://www.youtube.com/watch?v=ow3y21PGt5o&t
And bsme is correct, all ATI Fixtures include a hanging kit
theshaman
Member
I’m curious about what intensity you guys have running in your led clusters. I just bumped mine up from 40% to 50%. My tank is mostly sps but they’re all just little nubs ay the moment. Would higher led intensity make them grow faster? I am aware that too much led intensity can kill frags so I’m raising intensity a little at a time over a span of a month or two.
Thanks guy!
Thanks guy!
JPMagyar
New member
Keith -
Not sure how often you check this forum, and I will certainly call tomorrow, but i was planning on working on my fixture today when I realized that unlike my previous problem last November, I have 4 lamps not working (the 4 on the inside).
Does this mean I need 2 ballasts? What should I do to trouble shoot? If it is the ballast, does ATI still sell ballasts for my generation of Powermodules?
Thanks.
Joe
P.S. For everyone else I have been running the fixture with only the 4 outer lamps for about 9 months and my corals still look fabulous not to mention the bulbs are almost 2 years old now (yes - I tried new lamps in the slots that are not working) so long story short 99% of the time the fixtures we have provide more than adequate light.
Not sure how often you check this forum, and I will certainly call tomorrow, but i was planning on working on my fixture today when I realized that unlike my previous problem last November, I have 4 lamps not working (the 4 on the inside).
Does this mean I need 2 ballasts? What should I do to trouble shoot? If it is the ballast, does ATI still sell ballasts for my generation of Powermodules?
Thanks.
Joe
P.S. For everyone else I have been running the fixture with only the 4 outer lamps for about 9 months and my corals still look fabulous not to mention the bulbs are almost 2 years old now (yes - I tried new lamps in the slots that are not working) so long story short 99% of the time the fixtures we have provide more than adequate light.
Similar threads
