ATI Powermodule Hybrid Club

[Keith@ ATI NA]

For the last few nights, my lighting schedule has decided to turn back on in the middle of night even though the program is for 7am-10pm. Any ideas why this might be happening?

Are you turning off power? For example if it is on an Apex, do you cut power at some point? It sounds like it is loosing time.

If that is not it, I would recommend a full factory reset and load the program back to the light again. Its possible the file is just corrupt.

WiFi version - use a paperclip to push the button in the hole just above the ethernet port for 10 seconds.

Non WiFi - Use the menu on the controller to reset.

 

[pakirri]

Hey folks, anyone could measure the thickness of their powermodule acrylic cover? I measured mine and measures 0.156" which is 5/32 and I am having a really hard time finding someone that sells this type of sheet. I ordered a replacement on ATI north america but it takes 3 weeks and I dont know if I want to wait that long.

 

[Keith@ ATI NA]

Hey folks, anyone could measure the thickness of their powermodule acrylic cover? I measured mine and measures 0.156" which is 5/32 and I am having a really hard time finding someone that sells this type of sheet. I ordered a replacement on ATI north america but it takes 3 weeks and I dont know if I want to wait that long.

Unfortunately this is 4mm Metric acrylic which I do not believe is available in North America. This is why our distributor supplies replacement shields for Powermodules. While not cheap since it is imported from Germany it is likely your best bet.
You can find replacement shields on our parts store.atinorthamerica.com

 

[pakirri]

Unfortunately this is 4mm Metric acrylic which I do not believe is available in North America. This is why our distributor supplies replacement shields for Powermodules. While not cheap since it is imported from Germany it is likely your best bet.
You can find replacement shields on our parts store.atinorthamerica.com

Great to hear you guys are using 4mm. I will keep my order in transit.
thanks

 

[Punchanello]

Hi everyone.
I have a 4 bulb hybrid running

Coral+
Blue+
LED
Blue+
Coral+

I was wondering if people have a mix on channels 1 and 2 like this or do you prefer having 2 blue+ on one channel and 2 coral+ on the other?

I thought it might be nice visually to ramp up an all blue+ channel first then bring on the Coral plus during the peak. But does this affect coverage?

Hope this makes sense.

Sent from my Pixel XL using Tapatalk

 

[kokain]

Dear Keith@ ATI NA,
Is it possible to get the specifications for the leds of the led cluster last version?
Thank you.

 

[Keith@ ATI NA]

Dear Keith@ ATI NA,
Is it possible to get the specifications for the leds of the led cluster last version?
Thank you.

Since you are in Kazakhstan I would recommend you touch base with your local dealer or distributor. I am unsure what version of the fixture is available on your country.

 

[Matt Dean]

I am expecting my 48" 8-bulb powermodule next week! Where can i get the app for my iPad to control it? I only see the Windows version. Thanks

 

[Keith@ ATI NA]

I am expecting my 48" 8-bulb powermodule next week! Where can i get the app for my iPad to control it? I only see the Windows version. Thanks

Hello Matt!

Actually you don't need an app at all! The software you found is for the non wifi Powermodules when using the USB Cable. For the Powermodule you just use your browser.

 

[Matt Dean]

Awesome. Thanks! Surprised there isn't more clear documention onlinne for theis light.

 

[jpas]

I just received two 48" powermodules for my 360 gallon build. These are beautifully built lights!

I'm excited to get these setup!

 

[AquaManiak]

Just received my 6x54W + 3x led module, WIFI version. Sorry for the bad pic

First impressions: Solid construction and power supply, only some (very small) dents in reflectors, which by the way look amazing. Packaging subpar. Apart from that I like the programming, it has way more options compared to my old maxspect. Only thing that bothers me is that it only has 2 channels for the T5, one for 4 bulbs and one for 2. At least 3 channels would have been nice.
Not sure yet about the final bulb configuration, for now I'll try 3x blue+, 1x purple+, 1x coral+ and 1 true actinic. I can't test it yet, still need to find a solution for mounting, can't hang it unfortunately.

 

[Campitelli]

Hi all,
This si my new 4x75 + 6x80 powermodule.
Very well done.
It was a bit hard to add it to my home Wi-Fi network but it is done, so now i don't need anymore to disconnet from my home network to program it.

Inviato dal mio iPhone utilizzando Tapatalk

 

[romancvik]

Hi all,
This si my new 4x75 + 6x80 powermodule.
Very well done.
It was a bit hard to add it to my home Wi-Fi network but it is done, so now i don't need anymore to disconnet from my home network to program it.

Inviato dal mio iPhone utilizzando Tapatalk

Hi Campitelli, what T5 combo do you use? Your tank looks great!!

 

[Campitelli]

Hi Campitelli, what T5 combo do you use? Your tank looks great!!

Hi thanks a lot, i have 3 Coral plus, 2 blu plus and One purple


Inviato dal mio iPhone utilizzando Tapatalk

 

[Matt Dean]

Got my light up and running. Pretty sweet light. I love the build quality and quality of the light. Still need to dial it in a little more, but definitely a big improvement over my Tek Elite T5.

 

[Matt Dean]

So. I want to make sure I don't fry my corals with too much light. I am using what I believe is a moderate mix. I am using my eyes to estimate the amount I had before. I don't have access to a par meter. I had an 8-54W all T5 Tek Elite fixture before this.

I have screenshots of the program and colour mix. I have 4 54W T5s. 2 Blue Plus and two Fiji Purple on the outside channels. As you can see I am using mostly blue, royal blue and violet for the LEDs. Start and end with no white. Add some white and more blue midday.

Thoughts?

 

[Keith@ ATI NA]

Matt please be sure you do a proper burn in of your bulbs prior to dimming. T5's need to run at 100% for a minimum of 50 hours prior to being dimmed. If you fail to do this you will destroy the bulbs and likely have them fail in weeks not months.

 

[Matt Dean]

Thank you Keith. Totally forgot about that! I will set the T5s to 100%.

 

[GQuinn]

How quiet or loud are the fans on the new Powermodule LED lights? Where can I find out specifications of these fixtures (weight, length of cord, etc.)?