Building My 375gal Glass Reef

Status
Not open for further replies.
<a href=showthread.php?s=&postid=14190402#post14190402 target=_blank>Originally posted</a> by GlassReef
Elliott - I hate to use a San Fernando Valley word - but, your VFD is awsome! :D Would you mind giving the manufacturer and model number for both the VFD and pump. :cool:

Thanks!!!
Click to expand...

vfd/pump/timer details
the vfd is here (it's the smallest one, MM37/2)

http://www.nuaire.co.uk/IandM/micromaster1.pdf



Timer:
SQURRE D
class 9050
type JCK70V20
series A
multifuntion timing relay
input 120v
0.5sec - 999min
contacts: 1/3hp - 120VAC MAX
10A 240VAC,30VDC

pump:
Iwaki MX-250 with baldor 1/2 hp 230V 3-phase motor
 
<a href=showthread.php?s=&postid=14190454#post14190454 target=_blank>Originally posted</a> by IBASSFSH
What is VFD? Variable flow?
Click to expand...
It stands for Variable Frequency Drive - but I've always liked to think it stands for Variable Flow Device - more applicable to us. :D
 
<a href=showthread.php?s=&postid=14190684#post14190684 target=_blank>Originally posted</a> by Elliott
vfd/pump/timer details
the vfd is here (it's the smallest one, MM37/2)

http://www.nuaire.co.uk/IandM/micromaster1.pdf



Timer:
SQURRE D
class 9050
type JCK70V20
series A
multifuntion timing relay
input 120v
0.5sec - 999min
contacts: 1/3hp - 120VAC MAX
10A 240VAC,30VDC

pump:
Iwaki MX-250 with baldor 1/2 hp 230V 3-phase motor
Click to expand...
Thank you, Sir. That was quick.

BTW - have you noticed I've been spelling your name correctly (2 Ts) for a while now? At my age, things like that tend to slip right by you. :(
 
<a href=showthread.php?s=&postid=14190713#post14190713 target=_blank>Originally posted</a> by GlassReef
Thank you, Sir. That was quick.

BTW - have you noticed I've been spelling your name correctly (2 Ts) for a while now? At my age, things like that tend to slip right by you. :(
Click to expand...

no worries, I never noticed until now, maybe that reveals my power of observation :lol:
 
Tom
I ordered acrylic before I saw how you were making your supports. Coming this week, I have 1/4" sheet and 1/2" rod. I will probably put a point on the rod and glue several 3" long pieces to a 4x4 (or 6x6 depending on rock size) sheet to support my rocks. Do I have to recess the holes or will glueing the rods to the sheet work? I've never done this before so any advice will be appreciated. My rock is very porous.
Thanks
 
I think gluing would be fine, Alan. I used 3/8" and 3/4" because my rocks - I don't know any other way to say this - very large. I just didn't want to take any chances.
 
wow just got done with this thread and i thought you where going into space when i saw that light setup you have but its looking good cant wait to see some sand,corals,fish in there.
 
<a href=showthread.php?s=&postid=14190684#post14190684 target=_blank>Originally posted</a> by Elliott
vfd/pump/timer details
the vfd is here (it's the smallest one, MM37/2)

http://www.nuaire.co.uk/IandM/micromaster1.pdf



Timer:
SQURRE D
class 9050
type JCK70V20
series A
multifuntion timing relay
input 120v
0.5sec - 999min
contacts: 1/3hp - 120VAC MAX
10A 240VAC,30VDC

pump:
Iwaki MX-250 with baldor 1/2 hp 230V 3-phase motor
Click to expand...

Elliott,
In the video, the sound of the iwaki pump sounds a bit loud. Is this due to the camera mike or is it really that loud? Would you recommend one under a stand, for example?
 
LobsterMan, SeaIsle, saltyboy84 - thanks for your input.

MO Will - thanks and you're welcome.

ramirifi - the glass is 3/4 inch (19mm) thick
 
Tom, tons of info from your thread, thanks a lot.
My 215g is on its way, so I borrowed some ideas from you:)
Light rack components shipped already, and RO ATO will be next. Could you post more info about parts for ATO (float switches, float valves, and a solenoid)?
Also where did you buy your storage tanks, online or locally?
Thanks one more time for your very detailed info.
I`ll wait for more
Adam
 
Tom, tons of info from your thread, thanks a lot.
My 215g is on its way, so I borrowed some ideas from you:)
Light rack components shipped already, and RO ATO will be next. Could you post more info about parts for ATO (float switches, float valves, and a solenoid)?
Also where did you buy your storage tanks, online or locally?
Thanks one more time for your very detailed info.
I`ll wait for more
Adam
 
Tom, tons of info from your thread, thanks a lot.
My 215g is on its way, so I borrowed some ideas from you:)
Light rack components shipped already, and RO ATO will be next. Could you post more info about parts for ATO (float switches, float valves, and a solenoid)?
Also where did you buy your storage tanks, online or locally?
Thanks one more time for your very detailed info.
I`ll wait for more
Adam
 
Tom, tons of info from your thread, thanks a lot.
My 215g is on its way, so I borrowed some ideas from you:)
Light rack components shipped already, and RO ATO will be next. Could you post more info about parts for ATO (float switches, float valves, and a solenoid)?
Also where did you buy your storage tanks, online or locally?
Thanks one more time for your very detailed info.
I`ll wait for more
Adam
 
Status
Not open for further replies.

Similar threads

P
DIY Hang on back Sump Tank
Replies
14
Views
586
kharmaguru
kharmaguru
M
Return to Reefing
2 3
Replies
40
Views
2K
kelly_12
K
S
Looking at building a diy wood tank and stand
Replies
1
Views
475
Vinny Kreyling
Vinny Kreyling
LJA
Fish addition order
Replies
2
Views
173
OrionN
OrionN
C
Coral placement and water flow
Replies
5
Views
383
wvned
wvned
Back
Top