Building out a Red Sea Nano

And me just taking a picture with my iPhone.
6075F0C2-5841-4D48-AC0A-46BF9CEF96D8.jpeg
 
Test kits arrived today.

View attachment 32376287

Calcium 380ppm
Mg 1230ppm
dKH 7.0
NO3 3ppm
PO4 0.07ppm

Not ideal numbers. Maybe IO wasn’t the way to go. I think this could be corrected by adjusting the Mg level. Now just need to dig up an article on how much magnesium per gallon.
Did you roll the bucket?
Tends to settle out during shipping and storage
 
Did you roll the bucket?
Tends to settle out during shipping and storage
I did go back and mix the salt some more. I came to the conclusion that the system was too young and without some impurities lead to precipitation issues. Have plenty of IO laying around and will work it in during maintenance once the new doser for balling method arrives.
 
I just went through an issue with a bad batch of Coralife salt with super low Alk and super high Ca. It really did a number on my tank.
 
Came home with the expectation and excitement of my new doser and three part solutions. Doser didn’t arrive as expected and the Aquaforest Components 1,2,3 are all frozen/slurry at the moment…

E515D1D2-C4AF-4AF4-AF7B-7B6E2B774E32.jpeg


Move the components to the basement to find my return pump was not working for however long today… and my skimmer also jammed.

Decided a vinegar bath would be the best way to fix this. Soaked each for 30min and return fired up without issue. Skimmer though didn’t want to work with the end tightened all the way. Don’t know if I need to order a replacement part or the whole pump. Seems to be the internal rotor is not strong enough to overcome the rubber piece it slips into.
 

Attachments

  • D552E2E3-7D9C-4A20-B1EC-32581BBC0B8B.jpeg
    D552E2E3-7D9C-4A20-B1EC-32581BBC0B8B.jpeg
    1.9 MB · Views: 31
Sheesh, bad reef day. Sorry to hear about that.

Based on what you’re saying, sounds like you may need to replace the skimmer pump.
 
Based on what you’re saying, sounds like you may need to replace the skimmer pump.
Not the words I want to hear but I guess it happens. Im wondering if it’s just a simple flexible tube that fits around the impeller.
 
Not the words I want to hear but I guess it happens. Im wondering if it’s just a simple flexible tube that fits around the impeller.
Could be Nate. I’d need to put my hands on it to give a real opinion. Good luck buddy.
 
Had a lot going on here the past few days and I was unable to log into RC..

NooPsyche k7 v3 LEDs arrived. They no longer have a controller it’s all wifi. Took a little bit to get assembled and in the end needs to dremel the underside of the overflow lid to make it work.

912E37E2-0CE1-4181-8FD8-022FA53FDE68.jpeg
E1033FCF-9F2D-44A0-9E56-860B5AAFABF4.jpeg


Also got the doser hooked up.

E785967C-8703-44F7-B909-83367F5F8074.jpeg

One concern I have is that 1.5L may only last for two months or less depending on stocking. Need to brush up on making 3-part.

Labs today

Ca 410
dKh 9.6
Mg 1280
PO4 0.01
NO3 0

Need to figure out settings to take photos under new lights. Debating iPhone upgrade from 8 Plus to 14 Pro. Picture quality would definitely improve but I lose my beloved fingerprint sensor.
 

Attachments

  • E5A92536-64D6-4990-9332-DCD9321DED1E.jpeg
    E5A92536-64D6-4990-9332-DCD9321DED1E.jpeg
    1.8 MB · Views: 17
  • 8E8CFF44-9231-4249-83C0-D0D04127DE5E.jpeg
    8E8CFF44-9231-4249-83C0-D0D04127DE5E.jpeg
    1.3 MB · Views: 21
Have been patiently waiting for camera filters to come so I can start taking better pics… Delays in shipping and a strange notification that I may be entitled to a full refund makes me think these lenses will be at least another week.

Still dialing in the doser. Up to 5mL every two hours and parameters starting to stabilize.

pH 8.17
Ca 380
Alk 8.7
Mg 1280
PO4 0.03
NO3 Undetectable
 
Looking great!

Did you get the regular orphek lense kit or the extra large kit?
 
Back
Top