copper/brass fitting with rodi question

[greg0385]

Redoing my rodi station from a adapter from the kitchen sink to plumbed off clothes washer. I went to lowes and bought a plastic Y to split the cold water hose. The adapter to go from 3/4 to 1/4 hose is brass. Then i bought a water pressure gauge and a brass adapter to fit 1/4 inch hose on the rodi.

My question is- i was thinking that brass or copper can be used as long as its before the membrane and di resin on the rodi unit but want to make sure before using any brass.
Thanks for any info help you can provide

 

[RattlerSkin]

As far as I know and can tell, brass is OK as long as it is BEFORE the RO/DI process.

Since I am OCD about stuff like this, I would still looks for PVC pieces; both of them can be found online at a cheap price, if you don't mind waiting for them.

 

[James77]

Yes, it will work fine so long as it is before the membrane and DI would be smart as well. Most people have copper pipes in their houses which is very toxic to marine inverts, and people dont have problems\

 

[Buckeye Hydro]

Yes, it will work fine so long as it is before the membrane and DI

This is correct.

Russ