Okay, so simply put, I'm concerned with ich being in the brute I use for water mixing due to equipment from water changes touching my tank which is affected with ich. It's fairly unlikely but is still possible as it's a tubing that I use to connect my mixing pump (which gets a full week to air-dry in-between changes). I'm about to start TTM and want to make sure that there is no ich in that mixing tub, I remember reading that it will not survive in temps of 90F and above - Is this true? Since it's just used for mixing I figured I could raise the temp to 90F and then let it cool down.
PS: In-between water changes it usually sits for at least 1 day with mostly fresh water (sg is probably around 1.005 as there's about 2g of saltwater left from the water change and I put 15-16 gallons of fresh RODI water in it)
PS: In-between water changes it usually sits for at least 1 day with mostly fresh water (sg is probably around 1.005 as there's about 2g of saltwater left from the water change and I put 15-16 gallons of fresh RODI water in it)