Help Please! Controller/PH's Not Working

[Islander84]

A couple weeks ago after a storm i noticed my powerheads werent working. My 7095 wasnt working. I have 2 6100.10 and a 7095. When i plug in one of the 6100 into a power source and then pluh the sv cable into the controller nothing happens..... The lights kinda work on the controller but out of sync..... no movement from the pump. All help is appreciated!

 

[shawnz28]

Are either of the pumps working when not plugged into the controller?

 

[rvitko]

As Shawn suggested, please try both pumps without the controller cable connected.

 

[Islander84]

Nothing happens either way, impellers turn freely inside of pump when unplugged. Nothing happens when plugged into power w/ wo controller. Its weird that it all worked fine then all of a sudden nothing works..... except a few lights on controller but only from one ph.... and still no shaft movement

 

[rvitko]

Most likely the pumps have died and the controller is fine. If the driver alarms the motors have likely failed, if the drivers get hot but do not alarm, the drivers have likely failed.

 

[Islander84]

One gets hot one does nothing. Is it worth repairing? No alarms sound