How to update Euroquatics A1/A1P

[griss]

I believe one of the A1P I got somehow got set as a master. It would not synch with the other 4 lights so, I removed it. I got the 4 lights (2 - A1P and 2 - A1) synched and working. Then, since I didn’t have another A1P, I tried to add a spare A1. Now, I can’t connect to Euronet.

When trying to connect to Euronet on the laptop, I’m getting a message that says,
“Euronet
No Internet, Open”

If I try to log into Euronet I get a message that it failed.

 

[griss]

Oh for Christ sakes. I tried to re-synch the lights, when I did they all went out but the master.

 

[griss]

Now, I can login to Euronet but, my custom program disappeared again. What the hell? Do I have several bad light or am I just a bumbling idiot?

 

[griss]

And, now the lights won’t synch again. There’s been a joke in my family about <insert my last name> luck is worse than bad luck.

 

[wvned]

• The specific error message “No Internet, Open” is a common Windows or mobile device notification indicating that a device is connected to an unsecured Wi-Fi network (open) but cannot access the internet, often due to DNS issues, missing login portals (captive portals), or router configuration problems.
• troubleshooting this modern issue typically involves resetting network settings, updating network drivers, releasing/renewing IP configurations, or checking for captive portal login pages
  

 

[griss]

• The specific error message “No Internet, Open” is a common Windows or mobile device notification indicating that a device is connected to an unsecured Wi-Fi network (open) but cannot access the internet, often due to DNS issues, missing login portals (captive portals), or router configuration problems.
• troubleshooting this modern issue typically involves resetting network settings, updating network drivers, releasing/renewing IP configurations, or checking for captive portal login pages

I’m very non-technical, so I don’t understand any of that. My understanding is the Euroquatics lights create their own network so, it has nothing to do with my internet. Based on that understanding, there’s an issue with the laptop connecting to the light?????

 

[wvned]

Maybe.
The answer to that is technical. These lights are running an old obsolete network protocol. It may need a little help to talk to a new device with the ethernet adapter configuration.

 

[Reefing102]

Just a thought but is there a way to make them all masters with their own (but the same) schedule? I know not convenient but that may be the best way?

 

[griss]

Just a thought but is there a way to make them all masters with their own (but the same) schedule? I know not convenient but that may be the best way?

If there is, I haven’t figured out a way to do that. I’m also not sure why connecting to Euronet is so hit or miss.

 

[wvned]

You need a nerdy friend that can do simple networking stuff.
I suspect your network adapter is dragging info from the last network you connected to with wifi when you connect to Euronet.
Have you changed the batteries in them? They need to be good for the lights to remember their settings like the time if the power flickers.

 

[griss]

You need a nerdy friend that can do simple networking stuff.
I suspect your network adapter is dragging info from the last network you connected to with wifi when you connect to Euronet.
Have you changed the batteries in them? They need to be good for the lights to remember their settings like the time if the power flickers.

It’s weird be sure I had this constant disconnect from Euronet a while back. Then, no issue, now it’s happening again.

Yes, I changed the batteries in them.