Lets see those steel stands!

[jorahx]

You can have it built in two parts. I had to bring mine through an egress window in my basement. I had a local company build my stand to my specs and it was not that expensive either.



Two Part Stand



just scroll down to bottom

Thanks. I'll check it out!


Sent from my iPhone using Tapatalk

 

[harvin6]

anyone has a design for 96 X 30 x 30 tank steel stand? probably using btm sump.

 

[Yaryman]

anyone has a design for 96 X 30 x 30 tank steel stand? probably using btm sump.

Went with this for a 96x30x24 plexi tank.
Thirty inch tall tanks are a hand full, that's why I went with 24" tall.

Here's the thread about the tank/stand build

http://www.reefcentral.com/forums/showpost.php?p=20583314&postcount=4

 

[ThRoewer]

How about EZ Tube?
They actually advertise making custom aquarium stands and lighting racks.

 

[harvin6]

Went with this for a 96x30x24 plexi tank.
Thirty inch tall tanks are a hand full, that's why I went with 24" tall.

Here's the thread about the tank/stand build

http://www.reefcentral.com/forums/showpost.php?p=20583314&postcount=4

Nice stand , may i know what size and thickness steel you used for the stand?

 

[Yaryman]

Here's the thread for my tank stand and tank build.

http://www.reefcentral.com/forums/showthread.php?t=2201396

The stand is made from 1.5" steel tubing that is .125 thick.

The stand itself is 96" x 30" x 32".
Just my 2¢, but I would not go with a 30" tall tank. On my stand a 30" tall tank gives you a height of
63 inches for the top of the tank. Unless you are 8 foot tall, you will ALWAYS be on a step
stool to clean the inside of the tank. ALWAYS. Again, just my 2 cents.

Also just a suggestion, but I paid extra for a thicker top piece of the tank to prevent bowing on the front piece. I think it's 3/4 plexi on the top of the tank.
It has prevented bowing on the front piece now going on 7 years. Front piece is only 1/2" plexi.

 

[biecacka]

Question on a steel stand for a cube 48/48/24. What size tubing should I use and how many vertical support legs? 4 on the corners, or 8? Can I build the stand in 2 sections and connect them once I get them down the basement steps?

Corey