APEX speaketh...
APEX speaketh...
The Apex graphing mode only displays 24 hour periods at this time. An upgrade will allow graphing over selected periods of time, as in the ACIII. Here is how my graphs looked today and what they mean to me as a reefkeeper...
The graph (in blue) displays tank temperature over a 22 hour period. It got cool last night and I left the fishroom door ajar to allow fresh air to enter. It also chilled the fish room down the 72 degrees. The tank dipped to 76.5F...
The top graph below clearly displays the impact of lighting on a tank's pH. You can almost tell when the T5s come on and go off by the curve. This represents a low pH or 8.1 and a high of 8.35 -
The lower graph is the pH in the effluent of the CA reactor. When the pH falls is when CO2 is being dosed to the effluent. When it reaches 6.41, the CO2 is cut off until the pH rises back to 6.8. I am told by smarter people that this is the optimum range for a good by-product from the reactor.
Finally, here is a comparison of the "Energy Bar" plugs connected to the Apex controller. The top graph includes the (2) Barracuda Gold pumps. You can see when the closed loop comes on around 1130 hours. The lower graph shows the devices connected to the frag tank - the lights are on in the early morning hours on this tank.
The deep "dips" in the readout are when I turned off pumps to change filter socks and feeding time when pumps were automatically turned off by the controller.
If anyone has any questions, jump on in... if I don't know the answers, I'll make something up... :rollface:
LL
APEX speaketh...
The Apex graphing mode only displays 24 hour periods at this time. An upgrade will allow graphing over selected periods of time, as in the ACIII. Here is how my graphs looked today and what they mean to me as a reefkeeper...

The graph (in blue) displays tank temperature over a 22 hour period. It got cool last night and I left the fishroom door ajar to allow fresh air to enter. It also chilled the fish room down the 72 degrees. The tank dipped to 76.5F...

The top graph below clearly displays the impact of lighting on a tank's pH. You can almost tell when the T5s come on and go off by the curve. This represents a low pH or 8.1 and a high of 8.35 -
The lower graph is the pH in the effluent of the CA reactor. When the pH falls is when CO2 is being dosed to the effluent. When it reaches 6.41, the CO2 is cut off until the pH rises back to 6.8. I am told by smarter people that this is the optimum range for a good by-product from the reactor.

Finally, here is a comparison of the "Energy Bar" plugs connected to the Apex controller. The top graph includes the (2) Barracuda Gold pumps. You can see when the closed loop comes on around 1130 hours. The lower graph shows the devices connected to the frag tank - the lights are on in the early morning hours on this tank.

The deep "dips" in the readout are when I turned off pumps to change filter socks and feeding time when pumps were automatically turned off by the controller.
If anyone has any questions, jump on in... if I don't know the answers, I'll make something up... :rollface:
LL
Last edited: