ratm909
New member
Hello,
First of all my apologies for my manners and just barging in with a question on my first post! But the worst has happened to my tank and I just cant figure out what happened by lurking in the forums at this point.
Here are the stats before i go into detail.
-started november 7th 2015
-Reefer 350 91gal system with sump
-S-150 skimmer by eshops
-300w theo heater
-maxpect gyre
- marineland power head
-kessil ap 700
-IO salt
-rodi water
-no corals
-50 pounds of marco base rock
- 10 pounds of live rock
-initially added biospira when starting cycle
-1 inch fiji pink sand
-red sea testings kits
-ph using calibrated meter : 8.2
-temp 77
-salinity 1.024
-ammonia 0 (still 0 after disaster)
-nitrites 0
-nitrates barely a reading if at all
- alk 8.7
-cal 440
-mag 1200
-rowa for phosphate used in sump per instructions
-pellet carbon used in sump per instructions
-purple up used per instructions
- 15% water change per week
- added a pvc pipe in the tank on saturday (possible suspect?)
Livestock (before today)
- very small regal tang with 2 small clownfish for almost 2 months
- 1 black cap jawfish a lil later
- have been growing and eating real good, tang no longer hiding when i walk by
- fed a mix of frozen brine\mysis , purple seaweed, spirulina and dry food once a day
.
Well, i left this morning, always check temps before work. All was good, everyone was alive. Came back, everything was dead and there was a strong sulfur smell in the house, also , my skimmer was going bonkers, not just overflowing , i mean crazy foam.
From what i gather i am doing everything right and im a dedicated hobbyists. Last water test was monday, all was fine, and today, even after i came home to a tank full of dead fish, the parameters where still ok! Including temps.
I should also add i sat near my aquarium all evening yesterday and it was business as usuall, jawfish head sticking out, tang running after food particles in water. Clowns just doing what ever clowns do.
Im stumped and looking for any ideas someone could share, to make sure this does not reproduce itself in the future , Any opinion would be greatly appreciated.
Thanks
First of all my apologies for my manners and just barging in with a question on my first post! But the worst has happened to my tank and I just cant figure out what happened by lurking in the forums at this point.
Here are the stats before i go into detail.
-started november 7th 2015
-Reefer 350 91gal system with sump
-S-150 skimmer by eshops
-300w theo heater
-maxpect gyre
- marineland power head
-kessil ap 700
-IO salt
-rodi water
-no corals
-50 pounds of marco base rock
- 10 pounds of live rock
-initially added biospira when starting cycle
-1 inch fiji pink sand
-red sea testings kits
-ph using calibrated meter : 8.2
-temp 77
-salinity 1.024
-ammonia 0 (still 0 after disaster)
-nitrites 0
-nitrates barely a reading if at all
- alk 8.7
-cal 440
-mag 1200
-rowa for phosphate used in sump per instructions
-pellet carbon used in sump per instructions
-purple up used per instructions
- 15% water change per week
- added a pvc pipe in the tank on saturday (possible suspect?)
Livestock (before today)
- very small regal tang with 2 small clownfish for almost 2 months
- 1 black cap jawfish a lil later
- have been growing and eating real good, tang no longer hiding when i walk by
- fed a mix of frozen brine\mysis , purple seaweed, spirulina and dry food once a day
.
Well, i left this morning, always check temps before work. All was good, everyone was alive. Came back, everything was dead and there was a strong sulfur smell in the house, also , my skimmer was going bonkers, not just overflowing , i mean crazy foam.
From what i gather i am doing everything right and im a dedicated hobbyists. Last water test was monday, all was fine, and today, even after i came home to a tank full of dead fish, the parameters where still ok! Including temps.
I should also add i sat near my aquarium all evening yesterday and it was business as usuall, jawfish head sticking out, tang running after food particles in water. Clowns just doing what ever clowns do.
Im stumped and looking for any ideas someone could share, to make sure this does not reproduce itself in the future , Any opinion would be greatly appreciated.
Thanks