Mars Aqua Chinese LED review (Ebay)

I am finding several similar fixtures on Ebay.

How important is Wifi connectivity?

I currently have Dual 250W SE MH on a simple on/off timer.

The fixture that I am looking at is easily capable of running on a Dawn/Daylight/Dusk mode using simple timers. It also has a moonlight mode. If I can easily implement the moonlight mode into the timer setup, I'm not sure that I would need the wifi connectivity even though it would be neat to have.

This is the fixture I am looking at...
http://www.ebay.com/itm/2017-EVERGR...909229?hash=item5443bfffed:g:8vIAAOSwol5YwIIn
 
DougSupreme said:
I am finding several similar fixtures on Ebay.

How important is Wifi connectivity?

I currently have Dual 250W SE MH on a simple on/off timer.

The fixture that I am looking at is easily capable of running on a Dawn/Daylight/Dusk mode using simple timers. It also has a moonlight mode. If I can easily implement the moonlight mode into the timer setup, I'm not sure that I would need the wifi connectivity even though it would be neat to have.

This is the fixture I am looking at...
http://www.ebay.com/itm/2017-EVERGR...909229?hash=item5443bfffed:g:8vIAAOSwol5YwIIn
Click to expand...

But I'm confused
They have moonlights, but no on/off switch or power cord for them?
How will you be able to put them on a timer without a way to control when they come on?
 
DougSupreme said:
That's an excellent question, one which I sent to them hoping for a positive answer.
Click to expand...

Awesome, looking forward to the answer! Very confusing because if setting channel 1 / 2 on separate timers, then the unit technically has no power for the moonlight
 
If I was to run these units over a 30inch tank would I need to change to optics to get the penetration? I will be trying to grow sps 2/3rd of the way down.


Sent from my iPhone using Tapatalk
 
I believe the optics are better for penetration and not as great for spread. My tank is 43" Deep and I grow corals on the lower 1/3 no problem
 
I got my cob led today. So far pretty impressed with the amount of light it produces. I have it set to where the dimmer is just on and no more than that. Pretty scared I'm going to fry something. I need to borrow a par meter for these.

Build quality is nice. The fans are a bit loud but not more than my kids or tv noise.

The cob style is producing a lot of shimmer and I'll update on color separation after I used them a bit.

I am having an issue with the wifi on board I can't seem to connect or find my router with the app and I can't tell if me light is connecting to my router or phone. It's a Chinese app with minimal instructions.

Pics!


0f34839ac637e107f502bedb9cd4eb05.jpg


6ed5e3362c612497b8c6d532ab05e7ad.jpg


da7b0ff17d9b281a3fda125ff4006964.jpg


9a46249611422d02ee90e0489669d798.jpg


4afce9b24f81460fe4ac2113c0b1951d.jpg


I really did miss leds for the blue pop and shimmer.


Sent from my iPhone using Tapatalk
 
DougSupreme said:
I am finding several similar fixtures on Ebay.



How important is Wifi connectivity?



I currently have Dual 250W SE MH on a simple on/off timer.



The fixture that I am looking at is easily capable of running on a Dawn/Daylight/Dusk mode using simple timers. It also has a moonlight mode. If I can easily implement the moonlight mode into the timer setup, I'm not sure that I would need the wifi connectivity even though it would be neat to have.



This is the fixture I am looking at...

http://www.ebay.com/itm/2017-EVERGR...909229?hash=item5443bfffed:g:8vIAAOSwol5YwIIn
Click to expand...



I legitimately LOL'd at "Build in aquarium stress reduce technology"


Sent from my iPhone using Tapatalk
 
Bagabaga said:
I got my cob led today. So far pretty impressed with the amount of light it produces. I have it set to where the dimmer is just on and no more than that. Pretty scared I'm going to fry something. I need to borrow a par meter for these.

Build quality is nice. The fans are a bit loud but not more than my kids or tv noise.

The cob style is producing a lot of shimmer and I'll update on color separation after I used them a bit.

I am having an issue with the wifi on board I can't seem to connect or find my router with the app and I can't tell if me light is connecting to my router or phone. It's a Chinese app with minimal instructions.

Pics!


0f34839ac637e107f502bedb9cd4eb05.jpg


6ed5e3362c612497b8c6d532ab05e7ad.jpg


da7b0ff17d9b281a3fda125ff4006964.jpg


9a46249611422d02ee90e0489669d798.jpg


4afce9b24f81460fe4ac2113c0b1951d.jpg


I really did miss leds for the blue pop and shimmer.


Sent from my iPhone using Tapatalk
Click to expand...
Bagabaga, could you post a link to where you got that light? I definitely want to look into it but when I search for Cob led I can't find anything. Thanks!

Sent from my SAMSUNG-SM-G891A using Tapatalk
 
So I have a 48x24x24 and want to get 3x 165w Mars Aqua. However, I want to have a timer I can simulate sunrise/sunset etc.. from 7am - 11pm. Set and forget.

Any ideas??

I could alternatively get an LED panel from makemyled.com.au which has 60 set points throughout the day for light, but it's almost 3x the cost....

I do not have an APEX etc..
 
The wifi on these is wifi direct which mean they enjoy their own wifi you need to connect to with your phone. Not yet to your WiFi.
 
I can't figure out the wifi on this new unit. I'm emailing with the manufacturer because it's not connecting to the light.

There's no troubleshooting guide for these.

I'll make a video of the connection process later today.

Update: it works now, I set my timers and levels to very low for now and it's connecting properly.


Sent from my iPhone using Tapatalk
 
Last edited:
So I am thinking of getting a pair of the black boxes and changing out some led's. Question for those that have done this, when I search ebay for the led's I find them listed in a "range". For example if I want specifically a 12000k led they sell them as 10000k-15000k. I can't choose a 12000k led.

Are you finding the exact wavelength you want? Also, is everyone replacing their led's with epistar and bridgelux only or have some gone with generics? If the latter, how have they held up?
 
I ordered these when I was going to modify my marsaqua. But right before, I upgraded & purchased used programmable ones (different company named ones) off a local reefer.
Deliver was fast on these! About 1.5 week total from UK to my house near Los Angeles. Look to be pretty high quality too!
http://www.ebay.com/itm/14167934501...49&var=440821717691&ssPageName=STRK:MEBIDX:IT

------------

Since I now have programmable versions, love to hear everyones input on schedule! This is what I was thinking of running. Any input?
(edit: these are also with the 90degree secondary optics removed, so the 100% is NOT as bright as it would have been with them still on)

Thanks!
6PaUiE9yoQbgJNTyfa9fy26eGgWxx.jpg
 
Last edited:
You must log in or register to reply here.

Similar threads

T
Kessil A360XE TUNA BLUE Setup Help Please
Replies
2
Views
563
tgurske
T
M
$0.94 Actinics
Replies
4
Views
494
Reefing102
Reefing102
Easygoing1
PFO Aquatics SOLARIS Rebuild And Questions
Replies
8
Views
640
oreo57
oreo57
Anemone
PAR!
2
Replies
25
Views
2K
Misled
Misled
N
Lighting expert needed.
Replies
2
Views
517
Newy12345
N
Back
Top