Well i may have went a bit overboard but i decided to just dose another teaspoon and see what happens. Funny that after almost a 50% water change and 24hrs later, that ammonia badge has not changed color at all.
Defective badge perhaps?
Well i may have went a bit overboard but i decided to just dose another teaspoon and see what happens. Funny that after almost a 50% water change and 24hrs later, that ammonia badge has not changed color at all.
Defective badge perhaps?
I'm not sure what to believe anymore, i threw in another new badge for the hell of it tonight. Not sure how long it takes for the true reading to come through but noticed as soon as i put it in that it went to the same color as the existing one that is in there which is the green "Alert" level. Per there instructions, fish can tolerate that level for several days but i dont know how much is "several".
Of course my salifert kit continues to read 0. I decided to add 2 cap fulls of PRIME tonight and we'll see what the reading on the badges are tomorrow. These fish will need to be in this tank for at least another 2 months to allow the fallow period to complete, if the badges are indeed good, am I able to just add PRIME in the tank as needed to keep ammonia at bay? My AC110 filter was a cycled filter so not sure what the problem would be.
Ive noticed with those badges that the light can make it hard to interpret the color. Under an incandescent bulb it appears green but under normal aquarium lighting it is yellow. I went through the same thing with the test kit showing 0.00 but the badge appearing green before I turned on the aquarium lighting.
To use CP strictly as an algaecide, at what mg/g does it become effective?
Ive noticed with those badges that the light can make it hard to interpret the color. Under an incandescent bulb it appears green but under normal aquarium lighting it is yellow. I went through the same thing with the test kit showing 0.00 but the badge appearing green before I turned on the aquarium lighting.
How many more days are the current fish going to be in the CP?
Mike you nailed it! Turned off my room lights and turned on the tank lights and both of those badges were solid yellow! Then when i switched the lights, both were green again. Thanks for pointing this out, it was litterally driving me insane:hammer:
Would there be a problem using the TTM and CP? I am asking because I have several fish in my QT that I am quarantining before I introduce into my main DT. They have been in QT for 6 days now. One is a Yellow Tang and I want a Purple Tang also but I couldn't get any at the time. I was thinking I could use the TTM for the Purple Tang if I get one in around a week so that I could introduce them together in the DT. Would using CP during the TTM help out? I know it technically wouldn't be necessary for ich if the TTM is done correctly but the CP would help with any Velvet that might be on the Purple Tang and I can't see a downside to it? Anyone ever done it?
I finished a 6 week long treatment on CP in my display tank (700g) and although I fought some ammonia for a little while from rapid algae die off, the velvet and ich seemed to go away completely by the end of the first week. My purple had been completely covered when I started and I'd lost several other fish in the few weeks prior.
Throughout the course of treatment I also dropped the salinity to around 1.013 just to help with O2 levels as well as decrease the parasite numbers. At around 5 weeks I turned my skimmer and lights back on because my purple tang stopped eating anything and skeleton was beginning to show. At week 6 I started carbon because he still wasn't showing any interest in food. At around 8 weeks from the beginning of treatment I can tell the CP levels are near zero because algae is beginning to grow on the rocks again. The purple tang has also finally started eating again however he now appears to have a couple ich cysts... I swear I cannot win.
At this point I'm now considering just dropping salinity straight to 1.009 and seeing if Hypo will give it the final kick to kill it off. I had considered just using cupramine because the tank is a fish only but I don't really want to risk the cat shark and zebra eel as well as possibly saturate the rock in the case that I do want to convert it to a reef one day.
Also FYI I had no skimmer on for 5 weeks and only 3 moon light leds on for the treatment period with no water changes. I would have extended the no skimmer period longer but didn't want to risk losing my purple tang. I dosed 50g to an estimated 750g including sump, minus rock and sand. 700g tank plus 160g sump. That's roughly 67mg/g although could have been stronger as I only guestimated the rock displacement at around 100g. I probably have 400lbs of rock in the tank. Also, until I started the carbon, I had zero algae growth throughout the entire period and also killed off Bryopsis that had been living in the sump.
I finished a 6 week long treatment on CP in my display tank (700g) and although I fought some ammonia for a little while from rapid algae die off, the velvet and ich seemed to go away completely by the end of the first week. My purple had been completely covered when I started and I'd lost several other fish in the few weeks prior.
Throughout the course of treatment I also dropped the salinity to around 1.013 just to help with O2 levels as well as decrease the parasite numbers. At around 5 weeks I turned my skimmer and lights back on because my purple tang stopped eating anything and skeleton was beginning to show. At week 6 I started carbon because he still wasn't showing any interest in food. At around 8 weeks from the beginning of treatment I can tell the CP levels are near zero because algae is beginning to grow on the rocks again. The purple tang has also finally started eating again however he now appears to have a couple ich cysts... I swear I cannot win.
At this point I'm now considering just dropping salinity straight to 1.009 and seeing if Hypo will give it the final kick to kill it off. I had considered just using cupramine because the tank is a fish only but I don't really want to risk the cat shark and zebra eel as well as possibly saturate the rock in the case that I do want to convert it to a reef one day.
Also FYI I had no skimmer on for 5 weeks and only 3 moon light leds on for the treatment period with no water changes. I would have extended the no skimmer period longer but didn't want to risk losing my purple tang. I dosed 50g to an estimated 750g including sump, minus rock and sand. 700g tank plus 160g sump. That's roughly 67mg/g although could have been stronger as I only guestimated the rock displacement at around 100g. I probably have 400lbs of rock in the tank. Also, until I started the carbon, I had zero algae growth throughout the entire period and also killed off Bryopsis that had been living in the sump.
From what I have read about using CP it seems you approached using it incorrectly. When used in a DT with sand and live-rock I have read that the CP tends to get absorbed into the rock/sand and therefore can go under the needed levels to kill ich. Therefore you shouldn't use it in a tank with lots of LR/Sand. Only a QT.
Also, CP only kills ich in it's free swimming stage and not in it's reproduction stage. So if a single spore made it past your 6 weeks then when it hatched the new free swimming ich wouldn't have been killed.
^^This. There is "something" about dosing CP in a tank with rock & sand that just doesn't seem to work. Absorption (like with copper) seems to be the most logical answer.