New Geo reactor

[beaver]

I am having trouble keeping the co2 at a steady bubble rate. The supplied bubble counter over time will get water half way up the tube and I guess put to much pressure. I set it to 35-40 bpm and within a hour the co2 has stopped..

Any ideas
Beaver

mil sms122 controller and regulator

 

[cward]

Sounds like the needle valve on your regulator is not functioning properly.

 

[Jeremy B.]

Make sure your tank is full, the valve on the tank is fully open, and your solenoid is not sticking between open and closed.

 

[beaver]

Jeremy B
Thank you for your rapid response, the error was on my part. I was using the larger valve for fine adjustments to the bubble count. I now have the larger valve adjusted to 10 psi on the right valve and am using the needle valve for the fine adjustment. The count is now at 34 -36 bpm....

Again thank you and "cward" for your help....

Beaver