New Hydor pump

[Snarkys]

sure is cool to watch the high flow revolution happen : )

these things will only get cheaper as the big guys get involved.

 

[dhnguyen]

<a href=showthread.php?s=&postid=9011209#post9011209 target=_blank>Originally posted</a> by cristhiam
The resun won't work in the US this is what I got from that guy in Ebay
Thank you for your attention.
The total cost = AU$150+AU$60=AU$210=USD$158
ps: The volt of the pump is 220v not 110v, it can not work in USA.
any question please let me know
best regards
david

That's a simple matter. Just swap out the transformer with this

http://cgi.ebay.com/HP-Genuine-Orig...ryZ11201QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Cheap and easy enough.

 

[xinumaster]

got a vid of the hydor in action yet?

 

[xinumaster]

sorry.

double post.

 

[geckofrog]

After literally hundreds of emails, I finally got some pictures taken.

Here are a couple of Teaser shots. A full review can be found at link removed muchhh later tonight.

They are currently being tested and videos are being made. If you have any questions about them post them in the comments section as I do not check RC as often as I would like too.

 

[scaryperson27]

Sweet! I'm going to read your entry tonight. Can you get a video of it. My seller contacted me and told me they won't be getting them until the 1st or 2nd week of February.

 

[Beenalongtime79]

I can't wait to get mine. They should arrive this upcoming Saturday and I'll be one happy dude!

I'm still debating whether I will try them on my natural wavemaker.

Peace,
John H.

 

[quangtam7]

<a href=showthread.php?s=&postid=9012332#post9012332 target=_blank>Originally posted</a> by dhnguyen
That's a simple matter. Just swap out the transformer with this

http://cgi.ebay.com/HP-Genuine-Orig...ryZ11201QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Cheap and easy enough.

US model available HERE

 

[PANZER_TANK]

tag

 

[Beenalongtime79]

<a href=showthread.php?s=&postid=9016698#post9016698 target=_blank>Originally posted</a> by quangtam7
US model available HERE

Does anyone have a working link to that movie of the resun waver working?

Peace,
John H.

 

[Kayadad]

video worked for me. It is poor quality though and it looks like the resun is half-way out of the water. The video is top down in a skinny tank.

 

[scaryperson27]

It worked for me in Internet explorer but not Firefox. Maybe that is your problem.

 

[northbay-reefer]

have anyone used the hydor yet ???? review please

 

[quangtam7]

<a href=showthread.php?s=&postid=9017401#post9017401 target=_blank>Originally posted</a> by Kayadad
video worked for me. It is poor quality though and it looks like the resun is half-way out of the water. The video is top down in a skinny tank.

That is why it's so noisy . I will try a short video clip sometime next week when I am back in town.

 

[Beenalongtime79]

Yeah, firefox was the problem. If I only had a 6 foot or longer tank. Those would be a very cheap alternative to vortechs and Tunze. They are resun who also make pretty solid pumps (sedras).

Peace,
John H.

 

[quangtam7]

In the video, you can see it goes from low (~20 seconds) to medium (~15) to high (~10 ) then back to low right before the end, it is easier to recognize if you have the sound on.

 

[Beenalongtime79]

I noticed that... quangtam. Is there anyway you can adjust it so that it never hits high or never hits low. I mean, what if you just want it to cycle between low and mid or mid and high.

Also, are there any increments between low, mid and high? I guess what I'm asking is if there are finer distinctions between the the three settings?

I'm guessing you really like your pumps.

Cheers,
John

 

[Fishbulb2]

These pumps look huge. I'm guessing they would take up quite a bit of real estate in my 40g. :-(
FB

 

[quangtam7]

They are still in the box, I believe you can skip either one of them by turning the control knob all the way down, I will post a review later.

 

[Beenalongtime79]

Cool, keep us posted.