Pictures from New York (Dialup Beware)

melev

Well-known member
Rochester N.Y. is in the upper section of the state. There is a lot of farm country for miles and miles, which was very beautiful. Rochester gets a lot of snow being on the east coast, but this is their spring time. URSNY asked me to come speak to their club, and as we drove Saturday morning to Batavia I snapped a few pictures.

farm1.jpg


farm2.jpg


silos1.jpg


silos2.jpg


silos3.jpg


This is a house that belongs to KentE. He has a 400g plywood tank currently, and is building a new one that holds 900 to 1000g in his basement.
kente_house.jpg


kente_house_o.jpg


kente_400g.jpg


kente_sump.jpg
 
Last edited:
His tank looks like a toolbox or lunchbox, depending on your perspective. When you open the doors at the top, you can see his Luminarc reflectors that roll back and forth on a light mover. His tank only has two MH bulbs over it.

light_mover.jpg


Because his focus is upon the new tank currently under contruction, the current tank is not nearly what it could have been. He's planning on cooking all his liverock and setting up the new one with as few pest problems as possible. By starting over, he hopes to enjoy a nice reef again. This time he'll go back to a DSB over a barebottom system. He's got many frags growing in the sump (in the previous post), and an Imperator angelfish swims beneath.

A couple of pictures from the 400g.

Devils Hand fraglet
devils_hand.jpg


BTAs (I thought the clowns were hosting in a Torch)
btas.jpg


Gigas Clam
gigas.jpg


Torch coral
torch.jpg


Btw, check out his view from his house.
kente_view.jpg


kente_view2.jpg
 
This is the new tank, which is going to hold between 900 and 1000g. It is 5.5' wide, 9' long, and 30' tall. It's being made of birch plywood and then coated with a resin that can handle up to 1600PSI. I think it'll look amazing when done.

1000g.jpg


1000g2.jpg


His son crawled underneath, inside the stand. There are no central uprights because of a hump in the concrete foundation. It looks plenty strong to me.
1000g3.jpg


The inside joints are all lined with an angled board to reinforce the 90 degree connections. His last tank was built the same way.
1000g4.jpg


Kent on the right, Scott (bosborn1) to his left.
1000g5.jpg


1000g6.jpg


Here is another tank that has been built and has the resin already completed. It is super shiny, and is a black background. It feels hard to the touch, and very smooth.
resin1.jpg


This is the front, where the glass will be.
resin2.jpg


Taken with a flash.
resin_flash.jpg
 
Having already had breakfast, it was time to drive to Batavia where the meeting was to be held. I had two presentations prepared, and between those a frag swap would occur.

Check out the raffle prizes! :eek2:

shelby0.jpg


shelby1.jpg


shelby2.jpg


shelby3.jpg


shelby4.jpg


shelby5.jpg


Just kidding. Still, a reefer can dream right? These run about $100k, and I was told by one of the people there that this particular car is sold in Fort Worth & Dallas area more than any other place in the U.S.

Mark is their club president, and here he is talking to the attendees.

mark1.jpg


mark2.jpg


a_v.jpg
 
I checked the weather before packing and it was supposed to be 65F in the daytime, 35F at night. Figuring I'd be indoors I packed tshirts and a pair of jeans. A pullover would have been a smart move on my part. Oops. Friday night when I arrived it was pretty cool, but I survived. Saturday morning, the sky was clear, bright blue and sunny - the perfect day. Sunday morning it was cold, overcast and rainy. Not quite what I would think of as spring.

Here's another shot of the landscape.
landscape.jpg


And of a Douglas Fir tree. They were everywhere, and one of my favorite kinds of trees. I grew up in California, hiked a lot and saw many pine trees. The same when I lived in Switzerland. It was easy to feel comfortable around so much greenery.

douglas_fir.jpg
 
I gave two presentations. The first one was about sumps. The second one was about how to build one with acrylic. Since I did the presenting, and really what would be the point of a picture of a guy standing by a powerpoint slide, we'll just move on to the frag swap pictures.

I have to say I loved these little frag-holding tanks.
frag_tank0.jpg


frag_tank1.jpg


frag_tank2.jpg


Each were lighted with these PC light fixtures.
frag_tank3.jpg


A small powerhead maintained circulation and a heater was under the rack.
frag_tank4.jpg


Another tank contained frags and even a clam!
frag_tank5.jpg


Frags were brought in a bucket that had levels of eggcrate so that they could be stacked. A bucket held many frags. You can see them stacked in the third picture of this post.
bucket_o_frags.jpg


Some were bagged up, already sold.
frags_bagged.jpg


Glue was for sale as well. (Cyanoacrylate)
glue.jpg
 
Here are some shots of the frags.

frags1.jpg


frags2.jpg


frags3.jpg


frags4.jpg


frags5.jpg


frags6.jpg


What really impressed me was that these were all what I would consider unusual or rare corals, the kind you normally don't see at frag swaps. And this makes them more expensive. The more I looked in the tank, the more I realized I wanted. Since you can't carry on liquid on the plane, I resisted the urge to buy any. Until I saw this one.
sunset_monti.jpg


I bought it, and 7 hours later we finally put it in Scott's tank. The next morning, we bagged it up along with a couple of other pieces from his system, sealed them in a plastic container, placed this in a large ziplock bag, and then wrapped my clothes around it to try to insulate it from the cold. It was within my suitcase for the trip home, and then acclimated late last night to my system. I hope it survives. It is called a Sunset Montipora, one I'd seen in Naka's tank earlier this year.
 
More macros of the frags. This one is called an Australian Rose. I'd never seen it before, but he had a bunch of them for sale.
australian_rose1.jpg


australian_rose2.jpg


rare1.jpg


This one was $90, unless you wanted just a frag of it. I don't recall the exact name (Pavona something), just the price.
90dollars.jpg


A rainbow montipora with a hitchhiker. :eek2:
rainbow_monti.jpg


Acans
acan1.jpg


acan2.jpg


Duncan(something).
duncan2.jpg


duncan.jpg
 
A milli.
milli.jpg


Echinata?
echino.jpg


After the event was over, I decided that we had to go look up Gary Majchrzak, another Team RC member. We were looking forward to meeting at the event, but he was unable to attend. Btw, I did meet Guy, another TRC member.

Gary's tank was already shutting down for the night as we got there kind of late, so I only have a couple of shots.
gary_reef.jpg


With actinics only
gary_act.jpg


The plumbing leading down to the sump
gary_sump1.jpg


The sump with an external skimmer. This sump is set up so that he can do a water change with the system running. Water is pumped into the return section (right end), while the water draining down from the reef exits the left side into a nearby sink.
gary_sump2.jpg


This is his auto-feeder. It drops in food every 12 hours to keep the anthias fed. The food falls into the funnel, down the pipe and into the return section where it is pulled into an Iwaki pump and sent up to the display. He blames this system for his Texas-sized aiptasia. ;)
gary_autofeeder.jpg
 
Last edited:
Once we left, we got something to eat and some :beer:

Sunday morning I was up at the crack of 7:30am so we could head up to the Seneca Zoo. The URSNY maintain a reef tank there, and have been doing so since 2002. David Playfair (a former RC regular that had many followers) was one of the guys that got this project going.
seneca_zoo.jpg


Members of the club can make any corrections to what I'm about to describe, but as far as I recall it is a 540g reeftank made of glass. It is installed in a large room that has huge windows to view polar bears on the left and sea lions to the right.

Each Sunday, one or more members go to work on the tank. On the ladder is Guy, the Team RC member I mentioned before.
zootank_cleaning.jpg


Because it was relatively early, the actinics were on and taking pictures of fish is nearly impossible with my camera. I tried a few settings, and here are some of the better images. You'll notice the Sohal Tang in many of these pictures because I was hoping to get a good picture somehow.

zootank_act1.jpg


zootank_act2.jpg


zootank_act3.jpg


zootank_act4.jpg


zootank_act5.jpg
 
I had to resort to the flash. That Sohal Tang is just stunning, under actinics as well as under full lighting. It had to be 14" long, easily 1" thick, and ruled that tank. Its scalpel was over 1" long. Is it any surprise this is the RC logo fish? I may photoshop about 7 of them into my reef to get past this craving. :D
zootank_flash1.jpg


zootank_flash2.jpg


Here are some closeups under actinics, and also under MH lighting when they finally kicked on after waiting a while.

Octopus Coral (similar to Frogspawn, but with more dots)
zootank_act_octopuscoral.jpg


Orange plate coral
zootank_act_plate.jpg


Candy Cane
zootank_act_candycane.jpg


zootank_act_candycane2.jpg


This is a really pretty green tabling Acropora milleopora. I don't recall seeing this color before, but apparently many members there have it.
zootank_green_milli.jpg


Hawkfish
zootank_hawkfish.jpg
 
This huge Torch colony was being hosted in by some Ocellaris clownfish.
zootank_torch.jpg


Sohal - man those streamers are gorgeous!
zootank_sohal.jpg


These huge rose bubble tip anemones hosted a pair of Cinammon Clownfish. The main one used to be 24" wide before the split. It was about 12" wide that morning.
zootank_rbtas.jpg


Lobophytum
zootank_lobo.jpg


I asked about the maintenance. They'd changed 40g that day, and the zoo feeds the tank each day. They have specific rules, such as you can't kill anything in the tank. So aiptasia can't be nuked, and flatworms get to thrive. Kind of crazy, but the signed contract requires that they follow the guidelines. In front of the tank are two permanent binders that have heavily-laminated pages about each animal or coral in the tank.

The sump beneath uses Miracle Mud. The skimmer (not pictured) is a My Reef Creations, running externally at the end of the tank. The Aqua Controller II helps track tank parameters.
zootank_sump.jpg


Closed loop plumbing; eggcrate keeps jumpers in the tank.
zootank_closedloop.jpg


The pumps employ timed gate valves that switch the flow from one side of the tank to the other. Calcium Reactor in the forefront
zootank_pumps.jpg


A control panel to see what is on or off.
zootank_controlpanel.jpg


Icecap Ballasts
zootank_ballasts.jpg
 
A laptop tracks water parameters around the clock.
zootank_laptop.jpg


And then I had some time to see more critters. How about a polar bear that just got fed some tasty fish?
polar4.jpg


polar3.jpg


polar2.jpg


polar1.jpg


The cougar had a crawlspace under its habitat. You make your way through that and you can view them from a glass hut at ground level.
cougar1.jpg


The glass section is to the left of the cougar. It was nicer to take a picture without the fence in the way, right?
cougar2.jpg
 
Elephants.
elephant1.jpg


elephant2.jpg


Tiger
tiger1.jpg


Emus
emus.jpg


And finally a white wolf.
wolf.jpg


As it was raining, we quickly made our way back to the truck, and I got to eat the "World's Greatest Cheeseburger" before catching a flight back to DFW. Once I got home, my corals were acclimated, my skimmer needed some minor tuning, and all was back to normal again.
 
Information overload, eh? I figured you shutterbugs might enjoy a little diversity. This thread has it all, almost. ;)
 
Dang that is one fat mountain lion.

Luv the pictures. Maybe one of these days you'll come out to NorCal for tank tour and coral pics.
 
Great pics Marc. After your back from cali you can come up to Seattle. You know I volunteer at the Seattle Aquarium so I may be able to get you in cheap. lol
 
Back
Top