Placement & Settings for Streams

[srs777]

Hi Guys,

I've got a 100G SPS & Clam tank (52"x26x19). I bought 2 x 6100's with a 7095. I'm looking for the ideal placement of them as well as settings to use on the multicontroller. Here's a diagram with a front & top view wtih the grey part being my rockscape:

Even with the Streams I think I'll still need a bit more flow somehow. There's quite a few dead spots near the bottom.

Any inputs would be greatly appreciated.

Scott

 

[rvitko]

Interval 2 is the ideal program in my opinion. I would use a 6hr interval with 100%/30% pulses at 3sec duration. In this case I would probably place one pump on each side blowing straight across, one in front of the rock and one behind. I would place them about 6" from the top.

 

[srs777]

Hi Roger. Thanks for the reply. I'll give that a shot.