Share your Radion Graph!

Use peak of 65%, 12 hours a day, took the radiant color and programming was fzendo changes, reducing the white and the red and blue increasing for u have a white channel idea never passes 35% individual with 65% in Bright global; I am with this configuration two years ago. I realized that the white channel makes the corals grow very fast, not giving the same time produce protective proteins, and often expel zooxanthelae giving pastel in corals.
 
Ok after doing some reading here is my adjusted graph. Thoughts?
36B954A6-0BFD-4B9C-9465-5DFA512C1825_zpsyxdvl1rk.png
 
Hi there! After reading this thread I've noticed that nobody uses the Shallow Reef Natural setting... Is there anything wrong with it? I just got 2 Gen 3 for my 90g tank and looking for the most natural look.
 
Vapour1ze said:
Hi all, I've been active in this thread for a while.. I have tried numerous tweaks etc... I had a lot of issues starting out... Majority of my SPS appeared to be bleaching/losing color. I was very frustrated and had so many problems dialing in these lights just right. I really enjoyed the radiant color ramp schedule and my personal taste enjoyed it as well. I tweaked it a little bit. Little bit less red, and green. Also the whites are turned down now (this helped a lot) I run my Radion at 80% now... I've been at 70 for the past two months with great success, but the extra 10% is helping even more now.

I get my frags from a LFS with a superior selection of coral which is under Radion G2 Pros...

I am sharing my graph for those interested. The download link is below. (attached)

Tank Specs:
93 Rimless Cube
Radion G3 Pro XR30W
Dimensions 30x30x24
Light is on RMS

Here is my build thread, last few pages are all pictures from this graph... :) I have a lot of SPS and have super growth within a two month span. I am very impressed! Cheers!
http://www.reefcentral.com/forums/showthread.php?t=2438840


***If you decide to use, please post back thoughts. Thanks!

Here is a SS:
2015-01-07 14_32_12-EcoSmart Live by Vapour1ze, on Flickr


4N0A7038 by Vapour1ze, on Flickr

4N0A7090 by Vapour1ze, on Flickr

4N0A7079 by Vapour1ze, on Flickr

4N0A7044 by Vapour1ze, on Flickr
Click to expand...

I just changed my spectrum to what you have...i hope this does the trick for me
its a 135 cube (3x3x2) and i have 2 radio gen 3 pros with the wide angle lens at 9inch from the water surface

my corals were starting to brown out...will see how this does
 
Question about percentage settings. If I have my main slider at 50% and my advanced slider next to the color bars and 50%. The would my overall % be 25% seeing I'm running 50% of 50% ?
 
Looking for a graph or equivalent for a SPS tank with g3's 2 foot depth (tank is 6x2x2) and how far off the water your lights are.

currently using an Apex to run them but will type it in if you pass me your graph.

any help would be appreciated.
 
:hb2:
StevieK said:
Looking for a graph or equivalent for a SPS tank with g3's 2 foot depth (tank is 6x2x2) and how far off the water your lights are.

currently using an Apex to run them but will type it in if you pass me your graph.

any help would be appreciated.
Click to expand...

mine is really good for that... i have them about a foot off the water and my sps seems to love it and they are coloring up very nicely with good growth
 
Fishie80 said:
I just changed my spectrum to what you have...i hope this does the trick for me
its a 135 cube (3x3x2) and i have 2 radio gen 3 pros with the wide angle lens at 9inch from the water surface

my corals were starting to brown out...will see how this does
Click to expand...

Good luck! I am still having great coloration! I wish I had two over my cube, so I did make a change two days ago. I am now running the wide angle TIR lenses. I did NOT increase the intensity yet, I want to see how this goes without bumping up yet. I am at 80% at this time though....

I havea recent video uploaded here:
 
Hello all, I am running two Gen 1's with TIR over a 90. Who has a opinion on what I should program them. I have been running it over the tank now for over a year and have tried different kelvins and feel like I am not getting the growth I got from my t5's.

Right now I am running the lights for 12 hours. 8 hours at 20k 80%. 1 hour in the middle of that at 12K 50%. The rest of the time during the 12 hour schedule they are on deep blue 100%.

I may try what mos90 stated above... any other opinions?
 
New to the Radion and need help ! I have a 38G Innovative Marine Nuvo with a xr30w gen2 and I loaded Jons graph from the first page. Is this a good program for a mainly lps with some sps higher up on the rocks ? I have the intensity at 100% is this correct ? Read through the first 15 pages or so and see there are a few other graphs uploaded..any tried and true ?
Thanks for the help
 
Camps23 said:
New to the Radion and need help ! I have a 38G Innovative Marine Nuvo with a xr30w gen2 and I loaded Jons graph from the first page. Is this a good program for a mainly lps with some sps higher up on the rocks ? I have the intensity at 100% is this correct ? Read through the first 15 pages or so and see there are a few other graphs uploaded..any tried and true ?
Thanks for the help
Click to expand...

I highly recommend dropping that intensity down! You are going to bleach out your coral. Start around 20-30% I'm. And use the acclimate mode
 
After read through all pages i am still a bit confused what would be a good settings for zoas since my tank is a predominately zoas system. Could anyone please share their experience or program with me for growing zoas?
 
Mightyfish said:
Cool. Is it possible you can tell me how to import yr schedule onto my light please?
Click to expand...

Sure, download my .etg schedule file that was posted above.

in your ESL portal page click on the schedule items dropdown in the upper right corner. Import schedule and overwrite the existing. I would export your existing schedule first in case you do not like my schedule. You can change the start day and start night once it is imported. I would also turn on the acclimate timer and set it for 2-3 weeks at 70%
 
You must log in or register to reply here.

Similar threads

H
Top Performance for Your Aquarium with Hydor Prime External Filters!
Replies
0
Views
30
hydor_italy
H
Reef Kinetics
Exciting Updates: New App Features to Enhance Your Aquarium Care!
Replies
0
Views
247
Reef Kinetics
Reef Kinetics
M
Leather coral pest or disease
Replies
5
Views
145
kfisc
kfisc
I
I Have problems with my new saltwater tank
Replies
1
Views
148
griss
griss
H
Power, Precision, Performance – Hydor Seltz D AC Pumps: The Heart of Your Aquarium!
Replies
0
Views
29
hydor_italy
H
Back
Top