Switching from mh to t5 u think be beneficial for sps?

Fellow Ati user wondering if it's ok to have the fixtures basically touching when your rUnning more then one ? I have mine set up long ways with the cords on the ends so the fans are blowing the hot air out into each other is this ok? Hard to explain hers a pic I want to pull them in a little closer but worried about heat or this causing probs?

I swear I replied last night but my post has disappeared....:worried:

Anyway, It looks like you have just enough space between the fixtures to allow the hot exhaust air to vent out properly. IF you notice the fixtures getting too hot then you need to pull them apart another 1inch or so if possible.
 
Any of u guys ever loose one of the screws in your tank? I took the fixture all the way down but screw was gone next time I looked if it feel in I'm not sure what there made out of? Thanks for replys everyone I'm talking about the screw that locks the angle of the fixture
 
Any of u guys ever loose one of the screws in your tank? I took the fixture all the way down but screw was gone next time I looked if it feel in I'm not sure what there made out of? Thanks for replys everyone I'm talking about the screw that locks the angle of the fixture

I have no idea what they're made of. Maybe drop ATI USA an email. Hopefully shouldnt cause much of an issue. My buddy lost all his screws on his two units over his tank.
 
I have no idea what they're made of. Maybe drop ATI USA an email. Hopefully shouldnt cause much of an issue. My buddy lost all his screws on his two units over his tank.

they seem easy to fall off I guess that would be my only complaint on these units other then that there top notch!!! ill email ati today and keep u guys posted thanks I feel better if someone lost all of them :)
 
Sorry about that I just tested the screws and they will not stick to a magnet which makes me guess aluminum?
 
Ya I played around a bit I don't really like the Aqua blue special ... It has a yellow tint it seems the coral plus and blue plus with a purp plus seems to be my liking ... I'm just used to the brightness of the metal hilides so the tank seems dimmer but I'm sure it's getting plenty par and what it needs
 
Ok I'll get some tonight my corals seem to not be affected at all and actually seem more colorful under t5 ... Something that's crazy is the amount of 2 part I dose I had to increase by a lot since switching to t5 I think it's coincidence
 
Here's some phone pics best I can do this tank is a lot of fun 4 feet wide :) I love tanks with depth! So far loving the new lights I've alresdy though of sneezing a radium in up there somewhere but there's no space:)
 

Attachments

  • image.jpg
    image.jpg
    61.6 KB · Views: 3
Well your gonna think I'm crazy I actually mounted the lights long ways front to back this way I can take out bulbs and work with the fixtures easier without taking them down. My tanks 4feet wide. I may change it back I'm not sure yet .... It seem to look the same my bulb combo is blue+Coral+blu+purple+blue+actinic coral+blue+ And then same all the way down each fixture
 
That's not how I would do it but there are several ways to light a tank.
If you mount them the other way you can create more depth and highlight areas in your tank.
Have you ever made a video of your tank? You need to share it's beauty.
 
I agree it looked better the other way .it does give the tank more depth and seems to have better coverage .I think I'll put it backin the next day or 2 I don't know how to do videos? I just hated the dull spot in the middle ... But if I do it again I'll button it up tighter in the middle ... The center of my tank is like the centerpiece hard to explain
 
Last edited:
My hidden agenda was to see your tank. Pics will work. LOL
Have the front fixtures and rear fixtures raised a little to face each other.
Front to back, blue, actinic, blue, purple, blue, coral, actinic, blue, coral, blue, purple, blue, coral, blue, actinic, blue. This is just a suggestion.
 
Back
Top