SkullV
They Got My Number
Thanks for the suggestion guys I think I might give Tunze a try- Ted I love you
Love Me Please!!! :headwally:
(inside joke)
Last edited:
Tank2379 60G RR Cube Build
- Thread starter Tank2379
- Start date
Love Me Please!!! :headwally:
(inside joke)
nanonubey
Shogun
Its your story tell it how you want Ted :ape:
Tank2379
Active member
LOL... Thats classic
sonict72
New member
I was running a Mag24 on my skimmer a couple years back, it even had an effect on a 240G total volume system.
When I switched it for a GenX55, I first used it in my mixing barrel, I was shocked at how fast it raise the temp of a barrel of 28 gallons so fast and so hot, it was like bathwater...and yet, using the 24 was way overkill for mixing
Mag 24 uses whopping 265 watts. That is why it runs so hot. And why mag pumps put out more heat than other comparable pumps.
Tank2379
Active member
Updated Equipment List
Updated Equipment List
Well I decided to change some things up so I ended up switching out my Vortech from an ES to a wES and I also picked up the Tunze Return Pump Silence 1073.020- Build will be starting by the end of next week can't wait-:celeb1::celeb1::celeb1:
Updated Equipment List
Well I decided to change some things up so I ended up switching out my Vortech from an ES to a wES and I also picked up the Tunze Return Pump Silence 1073.020- Build will be starting by the end of next week can't wait-:celeb1::celeb1::celeb1:
nanonubey
Shogun
I think the flapper cost more being you'd most likely have to order it. I made the riser out of the tee flush with the top of the tank on Kevin's tank and it's nice and quiet and you don't see it. Also i like to use one size larger on the ball valves and unions and bush them down on drains since they are'nt full size ports. :thumbsup:
aussie_chicago
New member
If you change your mind, I have a true union flapper check valve you can have, I had it on my return on the 72 tank. I think its 1/2" but will have to check, maybe 3/4, I cant remember.
Tank2379
Active member
Moving right along- Background painted Black- Overflow is done (Plumbing completed) ... I spent most of last night finishing up the plumbing I used flexible tubing instead of the hard PVC- Looks a little twisted--lol but its holding up really well plus- I felt this will reduce some tension on the single 1 inch bilkhead fitting and glass. With this not being as thick as my 72G bow front I figure I tank some pre-cautions.. Anyhow it's all completed and ready to be tested and filled later today when I get home from WORKS...
Overflow completed
Plumb to the refugium
Had to finally give the Octopus NW 150 a Vinegar bath and soak it over night on.
Tank is ready to be filled I will run a leak test over night and by Thursday Sand and Aquascaping should be taking place- I will post shots later of the pre-fill. Until then Happy Reefing...
... I spent most of last night finishing up the plumbing I used flexible tubing instead of the hard PVC- Looks a little twisted--lol but its holding up really well plus- I felt this will reduce some tension on the single 1 inch bilkhead fitting and glass. With this not being as thick as my 72G bow front I figure I tank some pre-cautions.. Anyhow it's all completed and ready to be tested and filled later today when I get home from WORKS... Overflow completed
Plumb to the refugium
Had to finally give the Octopus NW 150 a Vinegar bath and soak it over night on.
Tank is ready to be filled I will run a leak test over night and by Thursday Sand and Aquascaping should be taking place- I will post shots later of the pre-fill. Until then Happy Reefing...
Tank2379
Active member
It's there looks blended in at the end before the elbow...lol
Similar threads
