The Bubble-Magus Club

Status
Not open for further replies.
Still looking at the BM 160 for my 120 gal tank and I am wondering if people are happy with the wedge pipe or has anyone considered doing a gate valve modification for better fine tuning?
 
To me the wedge pipe is as good as a gate valve. You can feel the changes as you turn the pipe, if that makes sense. It is a breeze to fine tune. I find them equal in terms of ease of adjustment and I have had both.
 
I also like the wedge pipe for control, the one on the BM160 has an o-ring that makes fine adjustment even easier than my older v1 BM100. Two big advantages over the gate valve:
1. Space, the wedge pipe doesn't take up any extra room
2. durability, there is no tight fitting shaft to crack or break
 
<a href=showthread.php?s=&postid=14437722#post14437722 target=_blank>Originally posted</a> by mmedley
how are these pumps on energy? Anyone notice a big jump on their electric bill?
Click to expand...

Dimensions: 6.7" x 10.6" x 21.6" (L*W*H)
Cylinder: 6"
Pump: ATMAN PH2500 115V
Power Consumption:
~28 KWH at 11" water depth
~24 KWH at 8" water depth
~21 KWH at 6" water depth
 
Does anyone know the cup clearance on the BM 100? I was looking at ordering one, but I only have 27" under my stand. Will I be able to take the cup off of the skimmer?
 
I measured and it is 1" to remove the collection cup.

I've got a question. How much restriction does the silencer create? I've removed mine and have noticed an improvement in skimmate production. Has anyone else noticed this? If not could someone give it a try and let us know the results.

Danreefs keep us posted on your new skimmer..........
 
<a href=showthread.php?s=&postid=14465861#post14465861 target=_blank>Originally posted</a> by geno7
I measured and it is 1" to remove the collection cup.

I've got a question. How much restriction does the silencer create? I've removed mine and have noticed an improvement in skimmate production. Has anyone else noticed this? If not could someone give it a try and let us know the results.

Danreefs keep us posted on your new skimmer..........
Click to expand...

Sure will The skimmer will be here on the 26 cant wait.
 
<a href=showthread.php?s=&postid=14466959#post14466959 target=_blank>Originally posted</a> by taekim78
I am thinking of getting the BM 150. I can't find a price for this anywhere. Can someone let me know? Thanks!
Click to expand...

They go for $300 or so on ebay. I think Nuocean had them for $265, but they've been out of stock for a while and don't expect any for a few weeks.
 
so, guys who have the 160, how has it been holding up? i've been reading a lot of problems with the 100

i'd like to get the 160, but can't find enough positive reviews from people who have had them for a while.
 
no problems with my Bm100..problems I think where in version1...I have version 2 and it works just fine..never any issues with startup after truning off and its very very quiet
 
I have the v2 BM160, it's working great so far (since 1-17-2009).

No restart issues, or clogging. No issues with the pump or any of the parts/pieces, makes great foam. I still haven't removed it from the sump to clean, or cleaned the pump shaft.
 
i have been debating selling my BM150, and getting the BM250S.

i think it will be a bit overkill for my 125G, but i am quite stocked.

i couldnt be happier with the performance of the BM150, i rave all the time about the performance. i wish someone would give some input on the BM250S.
 
Status
Not open for further replies.

Similar threads

Guygettnby
Stuck between 2 skimmers...
Replies
12
Views
524
Guygettnby
Guygettnby
S
Why do oversized protein skimmers not adequately remove protein from a tank?
Replies
12
Views
368
Paul B
Paul B
revclyburn
Need some thoghts on skimmers
Replies
7
Views
465
Timfish
Timfish
D
Turning Sump into Frag Tank?
Replies
2
Views
232
Dustin07
D
jay505
Is STARS still an active club
Replies
3
Views
119
griss
griss
Back
Top