The Life Reef Skimmer Club

Hi Dennis, believe it or not I am using a Mag 12. Water pumps out same way as internal (straight up) but then I have a 90 with tubing running out through the side of the stand with the skimmer sitting outside. The return goes back through the side of the stand and into a bulkhead in the sump.

There should be no difference running internal or external except maybe more pump options and therefore possibly different performance levels due to the flow rates with those pumps.

I can tell you that I have been playing around with the MTC skimmer using a Blueline 30 and 40 and you so hear them. They are not loud but compared to a Mag pump which you don't hear anything, there is the fan noise.

I don't think there is any reason to switch locations unless you need the sump space.

As Jeff said to me, the skimmer doesn't know if the skimmer is inside or outside.
 
Anyone here own the

SVS2-24 in sump 22 1/2" tall?

You can see below for the specs on my tank by I think this is going to be a pretty good fit for me. Was curious if anyone else here has this skimmer and how well it works.

I have that skimmer and it works well and is very consistent. Have never adjusted it since I first set it up.
 
Go to the skimmer section of lifereef.com

Jeff uses that skimmer on his own tank. I think I recall him saying he built it 10-15 years ago
 
That's a picture of his 24" taken about 4 days ago.
 

Attachments

  • uploadfromtaptalk1405194145016.jpg
    uploadfromtaptalk1405194145016.jpg
    36.4 KB · Views: 7
Flow through the sump doesn't matter with the skimmer. Most recommend a 6-10x tank volume turn over rate through the sump. But that won't affect 5 he performance of the skimmer.

Ideally you want your overflow to be skimming the thinnest layer of water possible.

IME most standard tank overflows can't do this well so it's a mute point unless you are going custom
 
The skimmers performance won't be affected by your turn over rate.

I have a mag12 return and a mag9 on my skimmer.

I was thinking about swapping them since I actually divert water back into the sump to control my layer of water being skimmed out of the tank.

Can't wait to get my custom tank delivered in about 3 weeks with a 42" external overflow :-)
 
I am setting up a 190gallon SPS tank using Zeovit. Is it recommended to use a Venturi or Beckett style skimmer. Does anyone have any recommendations? How quiet are the skimmers?
 
I have a Jebao 6000 asa return pump. Tried it on my 30in skimmer and did not drive it as good as the Mag 12. So Im sticking with the mag
 
I am setting up a 190gallon SPS tank using Zeovit. Is it recommended to use a Venturi or Beckett style skimmer. Does anyone have any recommendations? How quiet are the skimmers?

This skimmer is different than other Venturi skimmers (and becketts) as it is designed not to clog which leads to frequent maintenance.
Other than cleaning the cup, this skimmer is pretty much maintenance free.
 
Well i have to post mine. This is my first saltwater tank so i dont know what to compair it too but it works great.
mybysa2a.jpg
ruzy2azu.jpg
yqagy5u4.jpg
i got the whole set up sump skimmer fuge. Working with jeff was great. 8 months later if i email him with a question he will get back within 24 hrs. Its hard to find that kinda service today.
 
Back
Top