hi reefers ,
-I have done most of the electrical wirring and space managing of the dry compartment of my stand.
I say magaging because with all the controlboxes and oulets , i found it a challenge to sort it as clean and ergonomic possible.
-stil not all electrical connectors are plugged in on this picture , i still have to plug in two or more streamers , a 36 w LED refugiumlighting , the 48X3 watt led fixture that's now hanging over my nano and a sump cooling fan.... :wildone:
The refugium lighting i'm gonna use will be sort of an experiment , i'm gonna use a 36 W grow led lighting with red /bleu bridgelux leds in them.
this one :
http://www.eshinesystems.com/grow/4g-12x3w-led-grow-light.html
To see if Chaeto stays alive in nutrient poor conditions (less then 0.1ppm no3 and undectable po4), but not light limited , i think it will stay healthy (opefully) hopefully)
-Where the box of the dosing pump is on this picture , the reservoirs for osmotic water / Ca and osmosic/ Alk will be , in total about 40 l or 10 G.
The third channel of the dosing pump will be for vinegar dosing.
sump and stand overview ...
-The space for the refuge will be created with eggcrate , one space in the return section and one in the skimmer section.
I could resist to put on the 156 w T-5 and the 60 w cree led box , what a blast of light !!
And still this is 156 w short of what will be shinning in the future

, because the 156 w G4 LED box that now is shinnig at 40 % over my nano , will also be mounted on the right side of the rack.
You can see that on the right side there is less lighting , because of that.
But the bad news is that the tank is still not inside , it will be in the near future but not today ....:uhoh2:
greetingzz tntneon
