Tunze nano mod

[chaseracing]

I just picked up my (3) 6025's. I put them in unmodded just to check them out before I removed the tunnel inside. All seemed well. I modded them and the flow is amazing.

Two if them spin backwards everytime they start up and do not reverse. The third is perfect everytime.

I did not mod the front of the pump, so I do not need to do the 6045 reverse flow mod. It sounds like the soft reverse flow method doesn't work well.

What should I do? Any thoughts? I have no idea if they did this before the mod because I hacked into them almost immediately.
I have another 6025 on its way from MD. (Auto backorder shipping) I was going to see if putting a non modded cover on would solve this problem. If so........then we need to figure out another way to fix this. I am up for the challenge.

-=E=-

 

[mr pink floyd]

a photography lesson maybe...

dga, you dont like it, leave. i really could care less if you like my video skills or not. If you really are that much of a loser to follow a thread just to post because a video is blurry, than please, sell your tank and livestock, and buy a life

 

[chaseracing]

calm down. let it go. This kind of stuff can make a good thread go bad quickly.

-=E=-

 

[GSMguy]

<a href=showthread.php?s=&postid=9813452#post9813452 target=_blank>Originally posted</a> by mr pink floyd
dga, you dont like it, leave. i really could care less if you like my video skills or not. If you really are that much of a loser to follow a thread just to post because a video is blurry, than please, sell your tank and livestock, and buy a life

dude i think he is just showing us that he cant tell the difference beetween a video and a picture

fwiw your video is fine.

 

[mr pink floyd]

its a video, like i said, i couldn't care less what he thinks. i just get easily annoyed by people who have nothing better to do than stuff like that

 

[chaseracing]

Floyd,

Any thoughts on how to make a pump reverse itself? 1 works. 2 do not. See above.

Thanks!

 

[mr pink floyd]

i would do the wide flow mod. i noticed when i did it it reversed itself faster than with the big tube. maybe try it on one to see how it goes?

 

[GSMguy]

<a href=showthread.php?s=&postid=9813591#post9813591 target=_blank>Originally posted</a> by chaseracing
Floyd,

Any thoughts on how to make a pump reverse itself? 1 works. 2 do not. See above.

Thanks!

place your hand in front of the pump it will switch directions

 

[jacmyoung]

<a href=showthread.php?s=&postid=9813591#post9813591 target=_blank>Originally posted</a> by chaseracing
Floyd,

Any thoughts on how to make a pump reverse itself? 1 works. 2 do not. See above.

Thanks!

Your best bet is do the stopper mod, and glue the screen cap on after the stopper is put in.

 

[jacmyoung]

One more piece of info, from the latest 6025 owners, the new nanos are silent from the start. Roger also indicated his sample 6055 was 100% silent running from the start.

This may be an indication Tunze has finally solved the loose shaft issue. Just in time I'd say, but only time will tell.

Meanwhile I am posting another picture to show my plan for the up coming 6055 just to keep folks all motivated

The 6025 has a 1.5" ABS coupler as the nozzle and a 6080 fish screen glued on.

 

[skydancer]

<a href=showthread.php?s=&postid=9809142#post9809142 target=_blank>Originally posted</a> by jacmyoung
Skydancer, please provide me with the diagram, or a picture will be even better, I am no EE nor ME

Here it is...

 

[burton14e7]

I got my tracking number and supposedly to arrive May 1st. WOOT. I wonder why some retailers got them before others though. I hope these are knock offs from China!

Ship date
Apr 25, 2007

Estimated delivery
May 1, 2007

 

[GSMguy]

<a href=showthread.php?s=&postid=9816431#post9816431 target=_blank>Originally posted</a> by burton14e7
I got my tracking number and supposedly to arrive May 1st. WOOT. I wonder why some retailers got them before others though. I hope these are knock offs from China!

Ship date
Apr 25, 2007

Estimated delivery
May 1, 2007

6055???

 

[burton14e7]

<a href=showthread.php?s=&postid=9816521#post9816521 target=_blank>Originally posted</a> by GSMguy
6055???

No, the elusive 6025. I haven't been paying attention to the 6055s. Have they been hiding lately as well? Hehe..Sorry if I get your hopes up.

 

[jacmyoung]

<a href=showthread.php?s=&postid=9816047#post9816047 target=_blank>Originally posted</a> by skydancer
Here it is...

Thanks for the diagram but I think I still need a picture to know how to actually implement it. From the diagram it appears I have to cut the wire but I know it is not true.

 

[skydancer]

Unplug the ps from the pump. Plug the banana-to-clip wire from the multimeter to the PS (+ve) lead. Then plug the other banana-to-clip wire to the (+ve) lead of the nanostream. Then use a clip-toclip wire and connect the (-ve) PS lead to the (-ve) lead on the nanostream.

And that's it.

If and when I get my 6055 I'll measure it also.

 

[jacmyoung]

Now I can picture it, thank you. Can you give me an example of the kind of multimeter I can buy off Amazon and what accessories will I need to complete the test gear? Nothing fancy just something I can get quickly for plug and play.

burton14e7, if you think 6025 is elusive, then what is 6055?

 

[GSMguy]

<a href=showthread.php?s=&postid=9821349#post9821349 target=_blank>Originally posted</a> by jacmyoung

burton14e7, if you think 6025 is elusive, then what is 6055?

its an enigma
i do know they are in the USA just not in customers hands.

 

[burton14e7]

Hehe dunno, I haven't been following the 6055 I only have a 24g. 6025 x's 2 is enough.

 

[jacmyoung]

<a href=showthread.php?s=&postid=9821389#post9821389 target=_blank>Originally posted</a> by GSMguy
its an enigma
i do know they are in the USA just not in customers hands.

I will probably get one next week. The owner of a well-connected dealer agreed to ship me one of his first batch. I did have to promise him not to reveal their info. to anyone, publicly or in private. I have been nagging at him for the last month I think he just wanted to be left alone