600 Gallon Upgrade Build

On aquarium sides being too thick for some magnets: could you not get some pieces of acrylic that you could mount your pumps on, then mount the the pieces of acrylic on the sides of the tank?

Dave.M
 
On aquarium sides being too thick for some magnets: could you not get some pieces of acrylic that you could mount your pumps on, then mount the the pieces of acrylic on the sides of the tank?

Dave.M

I probably could but I dont know about the external magnets and how they would affect the aquarium being inside the water.
 
3eab77c90c52570616222e058301908c.jpg

377db45ca2ab9d1a021bb447b34e1a26.jpg

5bdcffd47e2110eadda4bcf0ee69e904.jpg

f1fcee69fae0c702cbe9e4c168e339fc.jpg


This is the stays of my tank today. Have I lost some corals, yes. Are some struggling, yes. Is it my fault, somewhat. In the past 2 months I lost a main pump, which I mentioned some posts ago, power supply to my WP60s went out and it took over a week to get a new one. Ordered 2 Maxspect Gyre 150s that I couldn't use because my acrylic is to thick for the magnets. Ordered the suction cups only to find out they don't fix my pumps because they were made for the original 150s and the ones I have now are the new noise reducing ones. So I came up with my own fix and this is it,
439b5fdfb311083693ab16e9ceef9e07.jpg

And this is one of the brackets I made to slide over my brace on the tank,
0942540be85fa431e7b50bf0c8160805.jpg

Now the only problem I'm having is when making my salt water, at 1.024 the alk is suppose measure 7.3-7.7 dKh but coming out at 14.55 dKh using Hanna and Salifert test kits. Other than that I'm good. Just stumped.
 
Well hello everyone. Sorry for the latest but I think I know my problem but then again I don't know my problem. Here is my tank as it looks today.

66b658bad79b9bc7d081237c53d94d9f.jpg

95955a775dfaaa6574b310a902fc2fc4.jpg

79f53bebb2c28faebbea09bdbeb98558.jpg


You're probably or probably not wondering what happened? All I know is everything was going well and randomly I would wake up or come in from outside of town and I will have flesh coming off the skeleton or worse just bleached out. The only parameter that I'm fighting at the moment is potassium as I can't get it over 360ppms to save my life. Maybe I'm not ready for mari cultured corals or my tank is old enough. So far the only corals surviving are aquaculture or corals I got from other hobbyist tanks. I'm not going to quit but maybe take a different approach.

I plan on starting all over and use aquaculture frags and just sit back and watch them grow. I always thought adding frags to a tank my size was like giving a whale a tic tac. I guess patience will have to be the key this time. I'm on the crossroads as to either start the calcium reactor back up or just straight start Part A, B, C dosing.

Sorry guys.
 
Back
Top