Attaching ReefBrites can be done but would not look right IMO. This is a well designed unit to have 2 black plain looking LEDs attached to it's side. I considered it too at one point then gave up the idea.
ATI Powermodule Hybrid Club
- Thread starter rodneyri
- Start date
Logzor
New member
I agree that it would ruin the look of the fixture. The Reefbrites are actually quite a bit longer than the ATI fixture. It would require a custom made bracket or cutting down the length of the Reefbrite (not sure how that is possible but some other users have actually done this).
I wish the LED cluster in the ATI had more RB or UV LED's. I think the amount of red is a bit overkill, however if you turn all the LED's to max power it looks nice, but that isn't very realistic in my opinion, so a lot of the red goes to waste. This is why I would like the Reefbrites in addition to the fixture.
Can't agree more. I have my LEDs tuned so the colors are close to the Reef Brites. Not the same but close.
MikeC120
New member
The tank is beautiful! I meant a picture of the lights alone from side and front. Want to see how the RBs look attached. Also can you share how you attached them?
MikeC120
New member
ATI unit is 46 inches. The reef Brite is 47 1/4 inches so it does hangover 3/4"
on each side I hung these from the ceiling with the AI Sol hanging kit one on each side.
I have never had someone come over and say nice tank but I don't like the way your lights are hung lol they are to busy looking at the tank
Granted my tank is not in my main living room it is in my fish room so there might be better esthetically pleasing mounts available?
that Fish Guy
Frag Swap Crusader!
Sure
Beautiful Aquarium!
Could you not fix the RBs to the side of the ATI? It would look weird hanging off cables in my living room and would result in a rift with the wife. I have seen the RBs screwed with a clamp to the side of the ATI Sunpower unit but that has the screws on the front unlike the Powermodule which has the screws on the side of the unit.
MikeC120
New member
I have seen one or two guys make brackets but I can't remember where?
Maybe do a search. I also heard someone say you can call ReefBrite and they will cut the light to size? You would have to call them and check.
Like I said for me and the location of my tank, esthetics was not a consern.
JPMagyar
New member
RC member Lunar used both fixtures and went back to the straight T5-non-LED fixture because he felt the LEDs were not helpful.
Only 5 times?
Thanks, glaukos, I'm very happy you like it so much.
I like all ATI lamps a lot. ATI hybrid fixture seemed a good idea for me, nice blicks again, many ways to arranging lights. However, I noticed after some months that not all my corals like leds light. The more delicate acroporas started to loose their vibrant colour.
Krzysztof
I have been running my fixture for just over a month now, and I haven't noticed any trouble from the LEDs. Meanwhile my colors are continuing to improve. ATI fixtures and T5s in general are simply the best technology around for keeping colorful SPS. I LOVE this fixture, but in my mind the LEDs are there for one purpose only. They provide outstanding shimmer and wonderful dawn/dusk effects. I do not think they are necessary for growing beautiful SPS. Clearly Lunar's tank is all the proof one needs.
Last edited:
Patrick Cox
Active member
Light to control box cable is about 90".
Patrick Cox
Active member
RC member Lunar used both fixtures and went back to the straight T5-non-LED fixture because he felt the LEDs were not helpful.
I have been running my fixture for about two months now, and I haven't noticed any trouble from the LEDs. Meanwhile my colors are continuing to improve. ATI fixtures and T5s in general are simply the best technology around for keeping colorful SPS. I LOVE this fixture, but in my mind the LEDs are there for one purpose only. They provide outstanding shimmer and wonderful dawn/dusk effects. I do not think they are necessary for growing beautiful SPS. Clearly Lunar's tank is all the proof one needs.
Thanks for your comments Joe. I agree with your assessment on the purpose of the LEDs in this fixture. My tank has generally adjusted to the light fixture but I do have a couple of acros that aren't doing so well and I wonder if it is the LEDs. It's really hard to say I guess but I will likely stick with this fixture because of the reasons you state and I'll adapt with corals that do well under this lighting.
BTW, your tank is beautiful!
Thanks.
ktompkins82
New member
Sorry if a question like this has already been addressed, I couldn't go through all 118 pages of the thread 
... How much space do you need for the hanging apparatus. My tank has a canopy this is 1 foot tall. I'm sure it would be tight but could the unit be suspended in there? I'm looking at the 60" unit for my 72" tank. Thanks for the help.
... How much space do you need for the hanging apparatus. My tank has a canopy this is 1 foot tall. I'm sure it would be tight but could the unit be suspended in there? I'm looking at the 60" unit for my 72" tank. Thanks for the help.
Patrick Cox
Active member
Sorry if a question like this has already been addressed, I couldn't go through all 118 pages of the thread
Which dimension are you worried about? Do you plan to suspend the light from the ceiling or something else?
Logzor
New member
It would be really tight. You want the fixture at least 6 inches above the water. The wire loops on the top of the fixture might have to extend 5 inches but could be hung on hooks inside the canopy.
However ATI does not recommend running this fixture in a canopy due to heat. I think it would overheat the fixture. Is ditching the canopy an option?
However ATI does not recommend running this fixture in a canopy due to heat. I think it would overheat the fixture. Is ditching the canopy an option?
Similar threads
